• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Striking hardened Steel on hardened Steel is a bad idea.

Csm Davis

Well-known member
4,166
393
83
Location
Hattiesburg, Mississippi
While working on flipping deuce hubs I was removing the wheelstuds by means of tapping them out. To ensure I didn't hit one off center, I placed a 3lb sledge on the stud and then struck the sledge with another hammer.

I knew this was a bad idea but did it anyway.

I felt an impact on my left hand. I thought perhaps the handle had twisted in my grip. A few blows later and my glove was bloody. I removed my glove, blood squirted.

Assessment revealed a small cut. I palpated and didn't feel any foreign body. I held pressure, got it stopped bleeding, put on a new glove and continued working.

I got home about 3am.

I woke up yesterday with more pain and swelling. Placing a magnet near the affected area caused instant extreme pain.

X-ray shows a steel shard about the size of a 5.56 projectile up against the bone.

I spent the day yesterday getting this dug out of me. My left hand is unusable for a while.....
Sorry for your pain. I had a similar thing happen years ago on my first day at work at a driveshaft shop, three of us were knocking u joints out at a big table and the owner reached and grabbed a PTO shaft instead of a drift and gave it a hard smack it spit a shard of steel straight into my forearm. Hurt like heck but was somewhat funny as I was cracking jokes about the owner fragging me on my first day.

sent from my decrepit fingers
 

swbradley1

Modertator
Staff member
Super Moderator
Steel Soldiers Supporter
14,258
1,759
113
Location
Dayton, OH
Ouch! I rammed a **** rusty piece of cable into my finger last night and luckily it didn't break off and stay there.

Get better soon.
 

VPed

Well-known member
Steel Soldiers Supporter
1,108
304
83
Location
Clint, TX
Sorry to hear of your injury. FYI to you and others - When I flipped the hubs on my deuce, I used a HF pneumatic impact hammer with a blunt punch tip to knock out the studs. The only drawback was to render the letter on the end of the studs illegible.
 

rickf

Well-known member
Steel Soldiers Supporter
3,146
1,680
113
Location
Pemberton, N.J.
Did the very same thing hammering on a U-joint and the same thought in mind. This is not a good idea. Shot two pieces, I had the joint cap that broke so they could match things up. They dug one out that had penetrated almost a full inch in my forearm but nobody saw the second one. They saw it was missing from the cap and figured it missed me, it didn't. It came out of my armpit a year later!!!! It had traveled the length of my arm inside over time. THAT is scary. I Never hit hard on hard anymore.
 

54reo

Well-known member
1,503
49
48
Location
Chester IL
The bit about foreign materials traveling to different locations in the body is a fact.
My grandfather was shot accidentally in the lower leg with a shotgun while hunting as a kid. He always talked about shot coming out of him in various places through the years but I never beloved him; until I saw a shot pellet fall out of his face (ear) while we were sitting at the table one day. It was under the skin when he showed me, then he proceeded to scratch it out.
Thorough the years those shot pellets came out of everywhere...
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks