• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Tail light running lights constantly on

Zeus51

Active member
115
36
28
Location
Birmingham, AL
Hey guys. M1009. The previous owner spliced into a lot of wiring. But I’ve gotten most of the wiring back to normal. Now that I’ve gotten the lights turning on with the dash switch and blackout lights working again. And the brake lights working. The running lights for both tail lights are constantly on, even when the key is off. But if I flip the blackout light down, they go out.

I’m looking for advice on where to start. Is there a relay somewhere that would stick on?
 

nyoffroad

Well-known member
942
690
93
Location
Rochester NY
No relay unless the PO put it in, first thing I'd look at is make sure it's really the T/L and not the brake light switch out of adjustment or the pedal just hanging to low.
 

Zeus51

Active member
115
36
28
Location
Birmingham, AL
No relay unless the PO put it in, first thing I'd look at is make sure it's really the T/L and not the brake light switch out of adjustment or the pedal just hanging to low.
Copy that. It’s not the brake lights. If I depress the brake light switch, the running lights go out. Strange
 
Last edited:

nyoffroad

Well-known member
942
690
93
Location
Rochester NY
Copy that. It’s not the brake lights. If I depress the brake light switch, the running lights go out. Strange
Check the brake light switch, did a PO change it? If so it could be the wrong switch or hooked up wrong. Some switches brake contact to shut off a lock up torque converter or cruise control.
 
Top