Maxgussam
Member
- 60
- 5
- 8
- Location
- Buffalo, MO
Drove my deuce home yesterday.
When I started out, the tail lights and front (amber) marker lights were working. The turn signals also worked.
When I arrived at home, the markers and 1 tail light were out, and the signals would not flash. I searched here, and followed the advice given for fixing the flasher unit ground.
So far, the repair has worked.
Is each light unit individually grounded, and is it possible the vibration of an 80 mile drive loosened the grounds on the lights? The head lights and brake lights work as they should, and the bulbs look good as well...
Thanks for any advice you can give!
When I started out, the tail lights and front (amber) marker lights were working. The turn signals also worked.
When I arrived at home, the markers and 1 tail light were out, and the signals would not flash. I searched here, and followed the advice given for fixing the flasher unit ground.
So far, the repair has worked.
Is each light unit individually grounded, and is it possible the vibration of an 80 mile drive loosened the grounds on the lights? The head lights and brake lights work as they should, and the bulbs look good as well...
Thanks for any advice you can give!
