• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

The potential end of my 1958 M54A2

cattlerepairman

Well-known member
Steel Soldiers Supporter
3,256
3,353
113
Location
NORTH (Canada)
Holy _____ No human got hurt, that is the main thing. A few good things in your favour

- truck did not roll. Fenders, roof, doors and other sheet metal looks relatively healthy. The mirrors are good :)
- the axles took a beating. While that is bad, it may have saved the frame. The rear axles might not even be bent.

Please let us know how this saga continues.

I had a bad week myself, truck-wise, don't want to talk about it, but I can relate to the sickening feeling, looking at the carnage.

All the best. Tomorrow will look brighter.
 
Last edited by a moderator:

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,716
19,766
113
Location
Charlotte NC
My 5 ton doesn't have a parking brake to start, popped out of gear today rolled down my driveway a bit then turned right through 5 trees and jumped 10ft completely disconnecting the front axle from the frame of the truck. Looking into another 5 ton parts truck but this thing is beat. Oh well had fun with it until this.View attachment 847055
.
Like everybody else said - THANK GOODNESS nobody was hurt! And there is some good sheetmetal still there. I can't imagine what it felt like to see your truck rolling down that hill... Maybe tomorrow will be better and it can be recovered.
 

tallguychase

New member
3
11
3
Location
Westcreek, Colorado
That'll buff right out....

Seriously, I hate that happened bud. Good luck in the hunt for another.
Holy _____ No human got hurt, that is the main thing. A few good things in your favour

- truck did not roll. Fenders, roof, doors and other sheet metal looks relatively healthy. The mirrors are good :)
- the axles took a beating. While that is bad, it may have saved the frame. The rear axles might not even be bent.

Please let us know how this saga continues.

I had a bad week myself, truck-wise, don't want to talk about it, but I can relate to the sickening feeling, looking at the carnage.

All the best. Tomorrow will look brighter.
What I meant by rolled was it rolled on the wheels down the hill with no one in it. the front axle is solely attached by one shock on the passenger side and the driveshaft
 
Last edited by a moderator:
Top