Lonesome715
Well-known member
- 2,664
- 25
- 48
- Location
- Columbus, GA
I will try it on my stock one first. I have all kinds of plans for my other one. I hope the addition of an intercooler will help it.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Thoughts and opinions on turning up the fuel on a deuce
- Thread starter Lonesome715
- Start date
Floridianson
Well-known member
- 7,413
- 2,514
- 113
- Location
- Interlachen Fl.
I don't know what IP you have but some use droop and some use smoke cam.
Droop screw is turned counter clock wise and the smoke cam is rotated down to decrease the gap between the fuel stop wedge plate. This is for the fuel/boost idle to 2000rpm.
Droop screw is turned counter clock wise and the smoke cam is rotated down to decrease the gap between the fuel stop wedge plate. This is for the fuel/boost idle to 2000rpm.
Lonesome715
Well-known member
- 2,664
- 25
- 48
- Location
- Columbus, GA
I will have to get the information off of them and find out.