Time to turn up pump, help!

[Rubenk]

I've read the stickied thread and all the others that I could find, but i'm not finding any pictures that really help.

I have a pyro installed, and have baseline temps, but cant find the fuel rate adjustment on my pump. I think it might be under this cover, but dont want to remove anything without asking first.

I know this is a daily question here, but please point me in the right direction. Thanks in advance!

*EDIT* Update to the question. I removed those 2 bolts, pulled the cover right off, and reinstalled the 2 bolts. I left the cover off.

I was then able to turn the adjustment screw just like in the stickied thread.

 

[shenkmen]

Don't forget to try searching...

CLick Advanced search --> type "turn up fuel" in the "Keyword"(s) box --> select "The Deuce" from the "Search in Forum(s)" box and click "Search Now".

The tenth post in the search results will help you. Ignore the first post as it is worthless.

I'm not busting your stones. I'm just teaching a man to fish.

 

[Rubenk]

Don't forget to try searching...

CLick Advanced search --> type "turn up fuel" in the "Keyword"(s) box --> select "The Deuce" from the "Search in Forum(s)" box and click "Search Now".

The tenth post in the search results will help you. Ignore the first post as it is worthless.

I'm not busting your stones. I'm just teaching a man to fish.

Before you try teaching a man to fish, perhaps you should learn to read. My OP clearly stated that I have searched and came up with no conclusive results.

This site is the absolute worst for telling people to search instead of posting useful information that contributes to a thread.

 

[doghead]

please point me in the right direction

He did.


May I ask, how many threads did you read? Should we really repost the same information, daily?

 

[barefootin]

Looks like you need to do some cleaning.....

To answer your question. Yes, it is located under the cover being held down by the safety wired bolts you have shown in your picture.

 

[doghead]

Do not report a post, just because you don't like the answer. Wasting our(mods) time, will result in restricted use of the site.

 

[Rubenk]

He did.


May I ask, how many threads did you read? Should we really repost the same information, daily?

He told me to read the stickied thread that ive scoured 100 times already.

Looks like you need to do some cleaning.....

To answer your question. Yes, it is located under the cover being held down by the safety wired bolts you have shown in your picture.

Thank you, if i remove those bolts to remove the cover will I need to do anything but put the bolts back?

 

[Rubenk]

Do not report a post, just because you don't like the answer. Wasting our(mods) time, will result in restricted use of the site.

It would make sense that the mods prefer useful posts rather than the large amount of garbage that is spewed, my apologies for wanting to improve the site.

 

[doghead]

and all the others that I could find

Roughly, how many was this?

How long have you researched this , before posting?

 

[doghead]

my apologies for wanting to improve the site.

My apologies for banning you for a week for displaying a crappy attitude.