DEA AK
Active member
- 163
- 88
- 28
- Location
- Palos Verdes Estates, CA
Oh, great thank you.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
To get my HMMWV (M1097A2) in good running order... need help.
- Thread starter DEA AK
- Start date
DEA AK
Active member
- 163
- 88
- 28
- Location
- Palos Verdes Estates, CA
Yes, I did buy the real, authentic, HMMWV brake line parts online.
DEA AK
Active member
- 163
- 88
- 28
- Location
- Palos Verdes Estates, CA
what is the best way to clean the top of the dash to remove all the dust/dirt/gunk so its clean before I paint it? I am sure this truck is like many others when it was received from gov planet... dust/dirt in every nook and cranny. I could do it the military way and just paint over rust and dirt but that wouldn't be good. I could spray cleaner and brush it down but I would be concerned about water getting into places it shouldn't... gauges, heater vents/tubes, etc..
thanks
thanks
DEA AK
Active member
- 163
- 88
- 28
- Location
- Palos Verdes Estates, CA
Anyone have or know what a creak sound under or around the driver foot well might be? I get a light metallic creaking sound every so often when going over different levels of terrain. I've checked below, steering components and other things seem tight. If I had to guess, to me it sounds like the body is creaking/rubbing or something along those lines. Nothing with a heavy metal sound, more of a light creaking sound. Thanks.
- 3,596
- 3,518
- 113
- Location
- Brooklyn, NY
Did you check the exhaust heat reflector?
DEA AK
Active member
- 163
- 88
- 28
- Location
- Palos Verdes Estates, CA
I did grab most everything down there. I guess to be more accurate it would sound like a medium metal sound. Something like the aluminum body might make. Some creak or random creakiness.
Do these trucks make that kind of noises even if the truck is solid? I don't have any other references to go from. As far as I know it could even be the driver seat... I just thought of that, heck maybe that is it?
- 3,596
- 3,518
- 113
- Location
- Brooklyn, NY
I have never heard a louder percussion group than when I’m driving my HMMWV’s. Puts Bonzo Bonnam and Neil Pert to shame.
- 5,635
- 2,953
- 113
- Location
- Metairie/La (N'awlins)
Some have a exhaust shield on the crossover pipe, The passenger side exhaust manifold has a heat shield ( Mine had a mounting tab broken off. Did not rattle but could have been an issue), and all the mounting brackets on the exhaust down range from the crossover should be looked at.
I also found a broken spring close to the exhaust hanger by the transfer case that pulled back a cable.
Everything can be suspect underneath.
I also found a broken spring close to the exhaust hanger by the transfer case that pulled back a cable.
Everything can be suspect underneath.
DEA AK
Active member
- 163
- 88
- 28
- Location
- Palos Verdes Estates, CA
If I install a stereo, I won't hear it anymore
DEA AK
Active member
- 163
- 88
- 28
- Location
- Palos Verdes Estates, CA
I do need to check more places, even if it sounds like its below, it could be coming from above... I guess I need to drive it more to try and track it down... :-/
- 1,713
- 2,279
- 113
- Location
- Rosamond, CA
Not sure why they are called HUMVEE's
Never heard a hum. Always something clinking, clanging and banging. Heard a buzz and that was the cut in the flywheel / starter shield touching.
What's a VEE sound like? CAMO
Never heard a hum. Always something clinking, clanging and banging. Heard a buzz and that was the cut in the flywheel / starter shield touching.
What's a VEE sound like? CAMO
- 7,017
- 9,695
- 113
- Location
- Papalote, TX
VEE: noun /the sputtering sound of an early German WWII rocket.
- 503
- 716
- 93
- Location
- Fort Lauderdale, Florida USA
The whole body is moving and making those noises. Mine does it every time i enter a gas station or there are shifting road levels. Specially on the left front side. It is inherent to these trucks. It sounds exactly as a submarine diving.
DEA AK
Active member
- 163
- 88
- 28
- Location
- Palos Verdes Estates, CA
I moved the driver seat when it was parked in the garage, I heard some metallic noise... not sure if it was what I heard but I am glad that some of you are saying they're kind of noisy trucks.
- 7,017
- 9,695
- 113
- Location
- Papalote, TX
Unfortunately the rattles, squeaks and leaks warranty has expired.
DEA AK
Active member
- 163
- 88
- 28
- Location
- Palos Verdes Estates, CA
I was never told about that... maybe I can file a lemon law claim
DEA AK
Active member
- 163
- 88
- 28
- Location
- Palos Verdes Estates, CA
Regarding tire pressure...
It says 'all models... 15 front, 18 rear'
Is that right? Seems very low so I wanted to ask.
Thank you
It says 'all models... 15 front, 18 rear'
Is that right? Seems very low so I wanted to ask.
Thank you
Attachments
- 3,003
- 4,420
- 113
- Location
- Olympia/WA
If you're off of paved roads all the time, then it would make sense to run lower pressures like that all the time, but on paved roads at higher speeds you're going to kill your tires pretty quickly at those pressures.
For on road use you're probably looking at 25+ PSI empty, and 30+ loaded. I know my M1123likes to be 35ish unloaded, and rears at 40-45 when loaded.
For on road use you're probably looking at 25+ PSI empty, and 30+ loaded. I know my M1123likes to be 35ish unloaded, and rears at 40-45 when loaded.
DEA AK
Active member
- 163
- 88
- 28
- Location
- Palos Verdes Estates, CA
Thank you, I appreciate your help.
DEA AK
Active member
- 163
- 88
- 28
- Location
- Palos Verdes Estates, CA
It actually turned out to be the driver side hood bumper. Just to test it, I put a thin piece of cardboard there and it stopped. So, I'll need to figure out how to keep the noise stopped forever