dstang97
Well-known member
- 1,859
- 31
- 48
- Location
- Clover, SC
does anyone else have a pioneer tool rack installed behind the seat?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
tool rack ?
- Thread starter dstang97
- Start date
FrankUSMC
Well-known member
- 1,559
- 28
- 48
- Location
- Newport, NC
We had them mounted behind the seats on our CUCVs in the Marines.
One of the few, Frank USMC RET
One of the few, Frank USMC RET
- 5,580
- 349
- 83
- Location
- DESOTO, KANSAS
Got a picture???
- 1,079
- 57
- 48
- Location
- New Palestine Indiana
dstang97
Well-known member
- 1,859
- 31
- 48
- Location
- Clover, SC
I took mine out and threw it out. It needed to be welded up and was missing some stuff. its the same rack on a m35
Cucvnut
Well-known member
- 3,804
- 61
- 48
- Location
- Carver, Oregon
I want one !
dstang97
Well-known member
- 1,859
- 31
- 48
- Location
- Clover, SC
I cant believe I threw it out. Im really kicking myself. and I never really throw out anything. I dont know what I was thinking
ralbelt
Active member
- 1,056
- 9
- 38
- Location
- West Warwick, R.I.
Not here.
paramilusmc
Member
- 177
- 8
- 18
- Location
- Charlottesville, VA
Pics or a link to a site where these would be sold/pictured.
1stSarge
Member
- 428
- 5
- 18
- Location
- Mount Vernon, Ohio
Yes, pics. And how would one come to acquire such an awesome piece of tactikool gear? (Translation: I want one too)
paramilusmc
Member
- 177
- 8
- 18
- Location
- Charlottesville, VA
View topic - M1007 Suburban CUCV Conversion :: Steel Soldiers :: Military Vehicles Supersite
I hope Im not to off topic with this but this is the one i found online, ya and i want one too. Hope its the right one.
I hope Im not to off topic with this but this is the one i found online, ya and i want one too. Hope its the right one.
- 2,479
- 25
- 38
- Location
- Houston Texas
I have seen the rack mounted in the front of the bed on some M1008's at the GSA in Ft Worth. Behind the seat might be easier than climbing into the bed to get to the tools. And worse if you had the truck loaded.
Shop Rat Fab
Member
- 99
- 2
- 8
- Location
- Detroit, Michigan
You need the MAXAX multi purpose tool then you do not need the big bulky pioneer tool rack. I have three of these one in each vehicle I own and they are nice. This is a special tool kit for all military vehicles, wheeled & tracked. This is made by Forrest Tool Co. in California. This has an axe, shovel, mattock, broad pick, pick, rack-hoe attachment & carrying case. $149.95 new but I bought mine off ePay for $75-$110 new and used.
Attachments
Last edited:
paramilusmc
Member
- 177
- 8
- 18
- Location
- Charlottesville, VA
Where are you finding it for 149.00. I can only find them for 250.00. PM me.
MSgt USMC (Ret)
New member
- 100
- 8
- 0
- Location
- Concord, NC
The MaxAxe is usually $200+ and is sold in a yellow or red in the civilian market. $125 is a crazy good price especially for a Mil issue OD green one.
Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
I got one
there is one in my 1028 and gunrack in each corner
there is one in my 1028 and gunrack in each corner
paramilusmc
Member
- 177
- 8
- 18
- Location
- Charlottesville, VA
I would love to get one in OD.
watkinssr
New member
- 247
- 3
- 0
- Location
- Fort Worth, Texa
How hard would it be to rattle can a civi one.
paramilusmc
Member
- 177
- 8
- 18
- Location
- Charlottesville, VA
Not hard, if you don't mind doing it every time you used the tool. Spray painting only holds up untill you use whatever you painted then it needs to be done again.
paramilusmc
Member
- 177
- 8
- 18
- Location
- Charlottesville, VA
I e-mailed the company, active duty military can get it for 175.00 out the door and you can get it in OD. Just thought i would pass the intel on to you guys.