• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Torque converter stuck on engine....

86m1028

Active member
1,687
17
38
Location
Murphy TEXAS
Yes but that becomes poor practice when you hit the TQ hub on something as the transmission comes down. Not to mention it is an awkward one man job to pull the TQ by itself. Comes out pretty easy and fool proof inside the bellhousing, especially when the trans is already tipped back. Just keep one hand on it to keep it from sliding forward.
Totally agree with you there....

I was just saying "it is do able"
 

86m1028

Active member
1,687
17
38
Location
Murphy TEXAS
Best way to tell if converter is fully seated is when trans is reinstalled,
trans is flush with engine block, there will be a gap between converter & flex plate.
when bolting converter to flex plate the bolts will "pull the converter to the flex plate.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks