tow bar feet?

[tm america]

I'm gonna be picking up a parts truck this in the next few weeks .i need med tow bar feet.I have a tow bar but mine has the heavy feet. if anyone knows where i could buy some or if someone has a set to lend me to do this recovery.i would pay to have them shipped and a little more .i can borrow my friends trailer if i have to but a tow bar would be alot easier.It's about 4 hours each way so i would like to travel lightly if i have a choice.....Any help would be appreciated.i already looked through the classifieds with no luck

 

[Recovry4x4]

What tow bar do you have? If you have large feet, I don't think medium feet will work. Sounds like you have the long non adjustable bar that Gimpy likes so much.

 

[tm america]

The tow bar i have is a heavy non adjustible tow bar .The feet that are on it have a 1.5 inch pin where it goes to the shackles. the pins at the tow bar look like they are 1 inch..this thing is a back breaker .I'm gonna hook the leg with the lunette up first then put the other on so i don't have to pick the whole thing up at once.

 

[SCSG-G4]

Deuce uses one inch pins to hook it to the feet, so if your feet have one inch pins on the truck end, you are golden!

 

[Recovry4x4]

Might also be able to get some 1" tractor pins and bush the 1.5 ends down. Gimpy and Poppop both use that bar alot and have insight.

 

[gimpyrobb]

I have the correct feet to use the tow bar from **** (1.5" pins)on a deuce. I also have the feet to use a medium tow bar from ****(1 and an eighth" pins) on a deuce. I also have the feet for a regular medium tow bar to be used on a deuce. I also have the feet for an "early" medium tow bar to be used on a deuce.

Which shall I send? PM an addy.

 

[cbvet]

Like Recovery said, just use 1" pins with 1.5" bushings. NAPA or a farm store should have them.

 

[Recovry4x4]

I have the correct feet to use the tow bar from **** (1.5" pins)on a deuce. I also have the feet to use a medium tow bar from ****(1 and an eighth" pins) on a deuce. I also have the feet for a regular medium tow bar to be used on a deuce. I also have the feet for an "early" medium tow bar to be used on a deuce.

Which shall I send? PM an addy.

Now all you need is a fresh pair of feet for the bottom of your legs and you'll have it all covered.

 

[tm america]

i'm gonna go measure the pins on my bar and pm you gimp .i can't bush the feet i have cuz they are so big they hit the bolts that hold the shackles on.If i were to try to use the ones i have i would have to plug the holes and redrill them lower in the feet....

 

[tm america]

ok i measured my pins on the tow bar they are 1 and 1/8 .. The pins on feet are 1.5 inches .The gap where the feet fit into the tow bar is around 1.75 inch

 

[gimpyrobb]

Sp you want feet that are 1&1/8th on one side and 1" on the other? I'll get them together here shortly.

 

[tm america]

thanks gimp i sent you a pm.

 

[emr]

And SOOO Do I

 

[TexAndy]

could you post some pics of this tow bar?

I have a sinking feeling I just won 5 of them and that I'm going to have a hard time finding the correct feet to tow deuces with them...

 

[wehring]

feet

I have some feet that you can try when you pass through.

Justin Wehring
979 997 3112