Trailer Dollys

[vinny-socom1]

M1075 yours are the 8tonners, cause I really wanted one but the shipping/frieght would be more than the dolly. I'm not up for another OK. trip the last one beat me up and took all my money...

Vinny

 

[Hammer]

grounded, I was planning on running the pin about 1-2" forward of the axles center line.
I still need a crank handle for my trailer's landing leg. It is blastedly HEAVY to do it by hand.

How did Andy mount his?
Even centered over the axle should work just fine. You don't really NEED much tongue weight on the tow vehicle when using a dolly.

 

[rosco]

Your better off buying one that is set up already. There is more to the brakes, hoses, and relay/emergency valve then you think. Brakes are sort of nice & will keep that thing from trying to pass you.

Lee in Alaska

 

[DavidWymore]

M197 or M197A1 are 6 ton units and use deuce wheels. M198 and M198A1 are 8 ton and use 5 ton stock.

would a 198A1 also use a 5 ton inner wheel seal? Thanks

 

[DavidWymore]

would a 198A1 also use a 5 ton inner wheel seal? Thanks

Looks like it