transfer case front drive shaft seal

[ryan77]

My front drive shaft seal was leaking i pulled it out and it looks like the yoke that goes into the transfer case is scored in two places from the original seal, or is it supposed to be like that. Ive change the rear drive shaft one and the yoke was smooth?

 

[Westech]

you dont have to change the yoke.. get a speedy sleave. Its a new seal and a thin steel bushing that repairs the groves. Go to Napa and they will fix you up.

 

[ryan77]

i looked on napa site and couldnt find it, do you have a part number?

 

[transman]

Any parts man worth s



Any partsman worth s#*t {thats SALT to all ya with a dirty mind} will be able to set you up with a sreedy sleeve if you take the yoke in with you to be measured !

 

[transman]

forgive typo in previous reply.

 

[ryan77]

i think i found it on autozone website they call it a kwik sleeve, i havnt put one on in years what do i do use thred lock to seal it to yoke?

 

[Westech]

nothing just pound it on. It is a very tight fit.

 

[ryan77]

Put it on today looks like it will works thanks for the tip.