• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Transfer case problems...

Divemaster920

Banned
494
1
0
Location
VA
NFG
Duece..1968...Jeep...Sprag.
High range no problems at all (yet).
No low range..shifter works in side of cab and on the underside. I suspect it is the "Shifter Shaft" "Fork" that needs replaced. Looks like a total tear down to get to it. Wanting to take the Truck on a 1000 round trip in a couple of weeks. Should I wait untill after trip to tackle or jump in now. And where do I get the "Fork" from? Or do I just repair the old one...if that is the problem?
I have driven it about 300 mile since Recovery.
Thanks
Curtis
 
Last edited:

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
319
0
Location
gainesville, ga.
my 819 would not go into low on the 07 ga rally, after i changed out the xcase, i forced it into low, the whole thing locked up, had to take the inspction cover off to get out of low, dont take a road trip with a bad xcase
 

Chevytruck

Active member
1,579
2
38
Location
Western Maine
quick solution is to swap out the Tcase and rebuild your current one. that way you got a backup.

:ditto: with the above, you can get stranded easily.
 
Top