Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Does anybody know where I can get a transfer case to transmission torque rod for a m1008. mine didnt have one and I broke my transfer case wheeling 38.5 bogger tires.
I think he is referring to the steel brace that goes from the right side of the transfer case to the motor mount on some civilian models. it will not be in the CUCV TM that I ever seen.
I looked at the pictures. Very nice. I never did that to any of mine. I never had a civilian 4x4 truck that had them. I have seen them but not very often. I wonder if it was an option code that you had to order. I have parted out several civilian trucks and owned a few in the target years and don't recall seeing them on anything I had. Anyone know. it sure would add some strength to the drive line. it would not stop the breakage from drive line balance and lock up but it would relieve some of the weight on the rear of the transmission and bell housing. I still have the drive line from a 1986 4x4 Suburban that was 4 speed stick and it did not have any of them rods. I always wanted to convert a CUCV to 4 speed stick but that never happened.