jesusgatos
Active member
- 2,689
- 28
- 38
- Location
- on the road - in CA right now
Just wondering what the specs are on these transfercase-mounted hydraulic PTO units. You know, GPM and PSI...
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
transfercase PTO specifications
- Thread starter jesusgatos
- Start date
1978davidw
Member
- 40
- 0
- 6
- Location
- unicoi tn
i think just about all the origional pto's were mechanical on these trucks mostly driving forward mounted winches mechanically. Im sure you can find aftermarket hydraulic PTO's that will fit the tranny. How much flow do you need.
jesusgatos
Active member
- 2,689
- 28
- 38
- Location
- on the road - in CA right now
No, I've already got a transfercase-mounted hydraulic PTO unit (two of them actually - anybody need one?). These are both the type that engage/disengage. I'm just wondering what the specs are on these.
- 34,010
- 1,822
- 113
- Location
- GA Mountains
These are not hydraulic PTOs. They can provide complete engine horsepower to whatever they are running. The flow and PSI depends on the pump you drive with them. They are used to operate the winch on an M756A2, bed accessories on an M764, the pumps on M49 and M50 trucks and the cranes on the M108 and additionally the winch on the rear of the M60 via a power divider.
- 9,580
- 218
- 63
- Location
- Dickson,TN
Kenny is right. They do have a hyd pump (oil pump) in them to lube them but that's it.
I do have one driving a hyd pump on my truck via a driveshaft.
I do have one driving a hyd pump on my truck via a driveshaft.
jesusgatos
Active member
- 2,689
- 28
- 38
- Location
- on the road - in CA right now
Oh man, I feel like an IDIOT. Of course you're right. I knew that, I swear... I decided NOT to buy the hydraulic pump that was on the truck I got one of these PTO's off of because I had no idea what the specs were.
- 9,580
- 218
- 63
- Location
- Dickson,TN
Here's the pump my t-case PTO is driving for my dump Haldex High Performance Gear Pump 1.159 Cu. In., Model# WP09A1B190R03BA103N | Pumps | Northern Tool + Equipment .
It's a Haldex gear pump and is very resonably priced for the GPM and pressure it puts out.
It's a Haldex gear pump and is very resonably priced for the GPM and pressure it puts out.
jesusgatos
Active member
- 2,689
- 28
- 38
- Location
- on the road - in CA right now
Sweet, thanks for the link. I'm not even sure what all I'm going to use that PTO for yet, so I'm not in any hurry to get a pump. I was just curious.
- 1,926
- 30
- 48
- Location
- Irmo, South Carolina
Ty,
Are you pleased with that pump? Does it make a lot of noise or give you any trouble?
Also, how do you have it mounted? Is it surface mated to the PTO via an adaptor or do you have it further aft on a SAE mounting bracket and driveshaft coupling?
Thanks bro,
Rick
Are you pleased with that pump? Does it make a lot of noise or give you any trouble?
Also, how do you have it mounted? Is it surface mated to the PTO via an adaptor or do you have it further aft on a SAE mounting bracket and driveshaft coupling?
Thanks bro,
Rick