Staffsargent
Member
- 220
- 1
- 18
- Location
- Blakeslee, PA
Just picked up a pair of new troop seats, but they are only 10'8". The ones on mine M35A2 are 13' 3". What can they fit???
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Troop Seats
- Thread starter Staffsargent
- Start date
gunboy1656
Active member
- 3,587
- 22
- 38
- Location
- Beaver Falls, PA
Guessing dump truck.
Staffsargent
Member
- 220
- 1
- 18
- Location
- Blakeslee, PA
Told to long for a 5T dump
- 8,280
- 655
- 113
- Location
- Corpus Christi, TX
Potentially an M36 since they have 4 sets of smaller length rather than one full set.
emr
New member
- 3,209
- 25
- 0
- Location
- landing , new jersey
An M36 is 17ft long I believe,
gunboy1656
Active member
- 3,587
- 22
- 38
- Location
- Beaver Falls, PA
M36 seat dont go from front to back in one piece, there is 2 segments to accomidate for the drop side portion.
wsucougarx
Well-known member
- 6,951
- 67
- 48
- Location
- Washington State
Are the legs at each end shorter than the other ones? If so, then you have the deuce dump truck troop seats
. Had the same ones in the back of my '67 M35A2 when I picked up my truck.
. Had the same ones in the back of my '67 M35A2 when I picked up my truck.
Staffsargent
Member
- 220
- 1
- 18
- Location
- Blakeslee, PA
Yes they are.
emr
New member
- 3,209
- 25
- 0
- Location
- landing , new jersey
but they do not add up to 17ft , my buddy has one, 10ft8 is wayyyy to long...they are for a dump...
gunboy1656
Active member
- 3,587
- 22
- 38
- Location
- Beaver Falls, PA
That was why I mentioned the dump in my first post on this.