Tubes and Liners

[1943ht]

Looking for new tubes and liners for my M37 Project (9.00 x 16).. looked at Coker tires website but they seemed a little spendy.. any assistance, suggestions / alternatives would be appreciated!

//R//
Markus

 

[Westech]

Fleet farm for tubes.. that is where I get all mine. Other wise check out the truck tire shops google ect....

 

[Bill W]

Check with you local truck tire shop, they should have them or be able to order them.

 

[1943ht]

Duuuh .. should have checked the truck tire sites for tubes and liners .. brain fart
Mounting Michelin XL's on both M37 and trailer

Fleet farm down the road from my HOR will check that out this weekend. Thank you for the help!

 

[gimpyrobb]

r16 tire tube | eBay

 

[gimpyrobb]

I didn't see any 900r16 listed, but there is a lot of metric sizes that might cross.

 

[mkcoen]

I just picked up new tubes at Vintage Powerwagons http://www.vintagepowerwagons.com/pdf/parts/13wheels.pdf

$20 per tube plus shipping.

 

[jasonjc]

Make sure you get radial tube.

 

[gimpyrobb]

Sorry I missed the part about using XL tires, you found some in 900r16?! Most of the ones I've seen were 1100s.

 

[1943ht]

GIMPYROBB .. picked some up in Anniston AL ... 7 - 9.00 x 16 XL's here with some new tires for my M818

 

[CGarbee]

I've found that my local farm Co-Op (Southern States) has these in stock at a good price... For larger tires (say 1100r16 XZL's and 1100r20XZL's) I've found that International Tire and Tube has been a really good source. Rusty at ITT is real used to having folks call and ask for tubes for M37's, M715's, and larger MV's, so he knows what you need...

713-550-9377 or 713-973-8880 are the two numbers that I use to call Rusty at ITT...

Good luck.

Oh, and as mentioned above: You can run a radial rated tube/flap in a bias ply tire, but you don't want to run a bias tube/flap in a radial tire...