- 6,434
- 8,985
- 113
- Location
- Papalote, TX
OK so I know if someone wants in they are going to get in, my only hope is to delay them until I can get them in my sights.
90% of us have the same key code if using the aftermarket door handle/locks and they are not very sophisticated as anyone with just about any tool/utility box key can simply run the key in and out while turning.
So I bought some tubular key lock to replace all the locks in both of my M998s (6 total)
Now the flippin floppers were too long so I had to cut them down and grind and file them into shape, but also the flippin floppers are not braded to the locks so one thing is I can set all the locks to turn the same direction on both sides of the truck, righty tighty lefty loosy!
The outside picture is unlocked
![IMG_20220304_180349810.jpg IMG_20220304_180349810.jpg](https://www.steelsoldiers.com/data/attachments/616/616001-f309b480468ff9be99854c9307a8fdcc.jpg)
![IMG_20220304_180425536.jpg IMG_20220304_180425536.jpg](https://www.steelsoldiers.com/data/attachments/616/616002-b6d156da7e77979d0b5f877d8d900667.jpg)
90% of us have the same key code if using the aftermarket door handle/locks and they are not very sophisticated as anyone with just about any tool/utility box key can simply run the key in and out while turning.
So I bought some tubular key lock to replace all the locks in both of my M998s (6 total)
Now the flippin floppers were too long so I had to cut them down and grind and file them into shape, but also the flippin floppers are not braded to the locks so one thing is I can set all the locks to turn the same direction on both sides of the truck, righty tighty lefty loosy!
The outside picture is unlocked
![IMG_20220304_180349810.jpg IMG_20220304_180349810.jpg](https://www.steelsoldiers.com/data/attachments/616/616001-f309b480468ff9be99854c9307a8fdcc.jpg)
![IMG_20220304_180425536.jpg IMG_20220304_180425536.jpg](https://www.steelsoldiers.com/data/attachments/616/616002-b6d156da7e77979d0b5f877d8d900667.jpg)