• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Turbo fan shroud

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,932
9,594
113
Location
Papalote, TX
If installing a 6.5L turbo in a M998 dose one need the turbo fan shroud? what is the difference?
 

Action

Well-known member
3,576
1,558
113
Location
East Tennessee
If installing a 6.5L turbo in a M998 dose one need the turbo fan shroud? what is the difference?
the factory turbo hmmwv have a longer cooling stack and an extended nose (headlight section). That fan shroud is fiberglass and longer than the standard shroud.
But the H1 turbo did not use the longer stack.
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,932
9,594
113
Location
Papalote, TX
the factory turbo hmmwv have a longer cooling stack and an extended nose (headlight section). That fan shroud is fiberglass and longer than the standard shroud.
But the H1 turbo did not use the longer stack.
Oh, OK so I will not need the longer fan shroud, THANKS!!
 

Bulldogger

Well-known member
Steel Soldiers Supporter
1,330
586
113
Location
Quantico VA
Until you asked I didn't know there was a Turbo Shroud. My 1987 M998 has a 1990's era 6.5TD stuffed in it using the original cooling stack and we seem to be doing fine.
BDGR
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks