Turn Signal Flaser Light?

[dabtl]

I there a bulb in the turn signal controller? The lights work fine, no flash on the steering column.

What gives?

 

[ARMYMAN30YearsPlus]

There is a bulb in there it could be any number of things but a ground may be the item or more have to really dig into it take a meter and the tools

 

[chuck500cc]

The flasher switch/relay in the LF fender well. It might be a loose ground also. Call Mark at RAPCO in Bowie. Great folks/service to help you out.

 

[CCATLETT1984]

it the lights on the truck work, then the flasher in the engine bay is fine, the issue would be inside the indicator.

 

[chuck500cc]

Re: RE: Turn Signal Flaser Light?

it the lights on the truck work, then the flasher in the engine bay is fine, the issue would be inside the indicator.

Roger that..

Chuck XD Fan

 

[cranetruck]

Note how the indicator light on the steering column is grounded locally, make sure the control lever housing is grounded to the steering column...

 

[ARMYMAN30YearsPlus]

Thanks Bjorn that is what I was getting at when I mentioned the ground

 

[dabtl]

I posted that, but within minutes I was saying to myself, Bjorn is going to jump on here and tell me to check the ground. Crap! I can see into the future it appears.

What put me to thinking on that is I recall looking at the control lever and noticing how weathered it appeared. I did not look to check the ground. Oh, well, hind sight and all that is best.

I will check it out, post Ike, next week.