Turn Signal Switch replacement

[xerofuzzion]

I'm assuming both of these can be used interchangeably, but just want to make sure before i make a purchase.
Also is there any benefit of one over the other?

11613632-1

11613632-3

 

[JoeJrTheBarber]

As far as I can see online they both do the exact same thing..

 

[Milcommoguy]

The first one without serial number and the plain Jane label is my guess a Taiwan knock off. Something to watch for with many electrical and gauges floating around... just saying.

 

[Action]

Don't they attach with 4 small screws instead of a hose clamp? See the bracket on the right side of the pic. I don't have an older one to compare.

 

[Milcommoguy]

They do on the Hummwv. Others like M38A1, M37's get the bracket and hose clamp.

 

[Gunnermac]

There is a difference, while both will work, the one with the four screws is for a HMMWV and is self canceling. The one with the bracket and hose clamp fits M37 , M35 etc and is manual canceling. Beware of the Chinese cheapo's.

 

[spoonsc1]

I would definitely go with the updated Nartron with the cancelling ring option. best thing ever made was that cancelling ring!!

 

[98G]

I prefer the top one due to the hazard lever is more robust.

 

[papakb]

The problem is that the cancelling ring pin breaks off and then your back in the same boat as the old style.

 

[spoonsc1]

The problem is that the cancelling ring pin breaks off and then your back in the same boat as the old style.

I'm sure I will be crossing that bridge someday, but so far so good!!

 

[11C 31A]

Anyone know where to get the canceling ring? My M998 has the one that looks like the bottom picture but has the canceling function I just don't have the ring.

 

[juanprado]

Anyone know where to get the canceling ring? My M998 has the one that looks like the bottom picture but has the canceling function I just don't have the ring.

Equipment part sales in Pa

 

[11C 31A]

Equipment part sales in Pa

Searched their site and couldn't find the ring, found the turn signal but not the ring by itself. Is it listed under a different name than canceling ring?

 

[papakb]

Another thing to remember when replacing anything electronic in the HMMWV is to disconnect one of the battery leads. This includes turn signal switches, PCBs, and alternators.

 

[juanprado]

Searched their site and couldn't find the ring, found the turn signal but not the ring by itself. Is it listed under a different name than canceling ring?

The web store is a tiny fraction of their inventory. Get the nsn / part number off the tm and give them a call. I ordered mine from them.

 

[ken]

I replaced mine about 6 months ago. I had the newer one with the canceling ring. It failed. I replaced it with the older style I just removed the hose clamp and used the screws to attach it. It works great and matches the ones on my M35 and M37. I'm still young enough to turn it off by myself. LOL.

 

[riderdan]

I replaced mine about 6 months ago. I had the newer one with the canceling ring. It failed. I replaced it with the older style I just removed the hose clamp and used the screws to attach it. It works great and matches the ones on my M35 and M37. I'm still young enough to turn it off by myself. LOL.

These young whippersnappers with their fancy self-cancelling turn signals and their intermittent wipers! Back in my day we turned the signals off ourselves and if the rain wasn't hard enough to need constant wipers, we turned the wipers on and off ourselves too! Now get off my lawn

Just kidding, of course. I think I can remember too, except I keep finding myself two minutes from the turn noticing the signal's still on. Getting older sucks, but it mostly beats the alternative.

 

[dilvoy]

Neither of the two pictured is the self canceling type.

 

[11C 31A]

Contacted them and they got what I need, thanks for the help.

The web store is a tiny fraction of their inventory. Get the nsn / part number off the tm and give them a call. I ordered mine from them.