- 33
- 71
- 17
- Location
- Camden, DE
So I made a post about a missing page in a TM manual and the post got moved and now I cannot reply to the person who answered. It says I have insufficient privileges. This has not happened before. What do I do?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Unable to reply
- Thread starter cdohner44mag
- Start date
- 14,695
- 5,058
- 113
- Location
- Buchanan, GA
If it was in a post that was moved into a TM section post, that's correct. Replies are not allowed in the tm uploads as it muddies the water. Could you add the missing info here or message the person so we can update the thread?
- 7,020
- 2,646
- 113
- Location
- Montevideo/Uruguay
This was first posted in the Website-Help-forum so I moved it to the HMMWV section - for now.
I don't know about that "Insufficiency......."-thing ?? It sure wasn't there this morning....
- 7,020
- 2,646
- 113
- Location
- Montevideo/Uruguay
Oops... not so fast old brain!
I thought I had moved it to the HMMWV forum, yes.... but instead it went to the HMMWV-TM forum. My bad!!
(And that also explains the no-privilege sign.)
The thread in question is now in the HMMWV forum and the OP should be able to find it.
I thought I had moved it to the HMMWV forum, yes.... but instead it went to the HMMWV-TM forum. My bad!!
(And that also explains the no-privilege sign.)
The thread in question is now in the HMMWV forum and the OP should be able to find it.