- 319
- 13
- 18
- Location
- Gardnerville, NV
In the process of trying to diagnose CTIS issues, I decided to install a small air pressure gauge to find out just what the **** was going on in my wet tank. I drilled and threaded the elbow coming out of the tank (after disassembling the regulator), and used an air gun to remove any latent debris. Here is the result:
![IMG_1577.jpg IMG_1577.jpg](https://www.steelsoldiers.com/data/attachments/419/419602-dbada0a413d3e21dced76acf43c3da60.jpg)
![IMG_1577.jpg IMG_1577.jpg](https://www.steelsoldiers.com/data/attachments/419/419602-dbada0a413d3e21dced76acf43c3da60.jpg)