Dr Zoidberg MD
Member
- 114
- 6
- 18
- Location
- NH
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Underbody Protection Kit
- Thread starter Dr Zoidberg MD
- Start date
Dr Zoidberg MD
Member
- 114
- 6
- 18
- Location
- NH
I have not been active on the forum, but if you still need dimensions, let me know and I will measure it tonight.
Sent from my SM-G930V using Tapatalk
NormB
Well-known member
- 1,220
- 72
- 48
- Location
- Cloverly,MD
I bought the tank and transfer case protectors and used the rubber insulators for the fuel tank anyway, placing them between the plate and tank. Plate rattles against front and back a bit; I used some scrap from floor padding with 3M weatherstrip adhesive to attach. YMMV.
Glad I saw this, as I had no instructions and didn't know where the TC plate went, now I know.
NB
- 5,635
- 2,953
- 113
- Location
- Metairie/La (N'awlins)
Would you still have the directions and could you post them?
Dr Zoidberg MD
Member
- 114
- 6
- 18
- Location
- NH
No instructions were included, but I used the references here: http://tfsweb.tamu.edu/uploadedFile...aintenance Manual M998 Series HMMWV Vol 3.pdf
Go to Section 12-295
sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
I have the installation instruction for the Underbody Protection Kit scanned to a PDF file. Not sure how to post it someone can help.
NormB
Well-known member
- 1,220
- 72
- 48
- Location
- Cloverly,MD
Pretty sure you just upload it as an image file (little picture frame above when you reply).
You will be held in the highest esteem if you do.
There outta be a site somewhere you can find/download instructions like those.
Thanks in advance.
Norm
ryanruck
Active member
- 427
- 46
- 28
- Location
- Cincinnati, OH
I recently picked up an underbody protection kit from a buddy of mine who has a couple but it didn't have the installation instructions so I checked online and found this thread but, couldn't find them anywhere. I messaged sermis a couple days ago about the PDF he said he had but haven't heard back and it looks like it's been a bit since he's been online here.
So my buddy made me a copy of the instructions he had in his kit and I went ahead and scanned them up.
Enjoy!
View attachment HMMWV_Underbody_Protection_Kit_Installation_Instructions.pdf
So my buddy made me a copy of the instructions he had in his kit and I went ahead and scanned them up.
Enjoy!
View attachment HMMWV_Underbody_Protection_Kit_Installation_Instructions.pdf
Last edited:
NormB
Well-known member
- 1,220
- 72
- 48
- Location
- Cloverly,MD
D'oh! Got my hopes up. Clicked link and got
Message: Invalid Attachment specified. The Attachment may have been deleted for various reasons. If you followed a valid link, please notify the administrator
ryanruck
Active member
- 427
- 46
- 28
- Location
- Cincinnati, OH
That's strange... I click on it and it prompts me to download the PDF!
Maybe someone on staff can check the message? I did have trouble uploading it and had to upload it to another site then use the URL link in the uploader to upload it.
Norm, PM me your email address and I'll email it to you. It's about 9MB.
- 5,635
- 2,953
- 113
- Location
- Metairie/La (N'awlins)
It worked for me.
Norm, I will email it to you.
Awesome and appreciate the posting.
I picked up just the front part off ebay from saturn cheap I think $55 and it fits the front winch cradle perfectly and the holes are there. Bummed out to see I need to drill the holes in the front cross member and it looks like a biitzch for clearance. This project went way down on list....
Norm, I will email it to you.
Awesome and appreciate the posting.
I picked up just the front part off ebay from saturn cheap I think $55 and it fits the front winch cradle perfectly and the holes are there. Bummed out to see I need to drill the holes in the front cross member and it looks like a biitzch for clearance. This project went way down on list....
Last edited:
ryanruck
Active member
- 427
- 46
- 28
- Location
- Cincinnati, OH
Yeah I tinkered with it a little more last night and got the thumbnail to show up after re-uploading it again. It does seem to be working now. Not sure what the issue was.
- 5,635
- 2,953
- 113
- Location
- Metairie/La (N'awlins)
I posted some pics and tips for installing the front differential cage on my winch truck on my build thread.
https://www.steelsoldiers.com/showthread.php?157259-Juan-s-M998-HMMWV&p=2064504#post2064504
https://www.steelsoldiers.com/showthread.php?157259-Juan-s-M998-HMMWV&p=2064504#post2064504
- 5,635
- 2,953
- 113
- Location
- Metairie/La (N'awlins)
A question for those that have installed the intermediate cage is how easy is it to change the oil filter? Can you reach though the hole(s) to do the oil change or do you unbolt and remove it for service? How easy is to unbolt and drop?
Just trying to decide if I want to go this route?
Just trying to decide if I want to go this route?
BnaditCorps
Member
- 479
- 1
- 18
- Location
- Solano County, California
Are those Steel or Aluminum tubing? My gut is saying steel, but 120lbs seems optimistic for steel, unless it is insanely thin tubing.
Action
Well-known member
- 3,576
- 1,559
- 113
- Location
- East Tennessee
Steel. I thought they were over 200 # crates.
ryanruck
Active member
- 427
- 46
- 28
- Location
- Cincinnati, OH
They are:
That's with the crate though so I'd say the kit itself is probably in the neighborhood of 170 total.
The fuel tank and transfer case plates are fairly thin for what they're supposed to be. Personally I think they could have made them both more substantial but, it's better than nothing.
- 5,635
- 2,953
- 113
- Location
- Metairie/La (N'awlins)
That would be the weight of all the components. 3 cages, 2 big brackets, 3 plates, and hardware . Not as much as I would have thought. Front cage I would have guessed around 30lbs.
BnaditCorps
Member
- 479
- 1
- 18
- Location
- Solano County, California
170 pounds is more reasonable, but still light for what it is. I wonder if it was given a treatment? I am getting way too far into this though considering I don't own a HMMWV.