Kwai
New member
- 223
- 5
- 0
- Location
- Houston, TX
What is the purpose of this trailer?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Unknown trailer ???
- Thread starter Kwai
- Start date
steelandcanvas
Well-known member
- 6,187
- 85
- 48
- Location
- Southwestern Idaho
Don't know, but it doesn't look like it's built to mil-specs.
Jones
Well-known member
- 2,237
- 83
- 48
- Location
- Sacramento, California
What does the plate in 'unknown 3' say? With the controls that look like they work the sides and what appears to be an auger on the bottom, my guess it's some kind of spreader but for what...?!?
citizensoldier
Active member
- 3,981
- 17
- 38
- Location
- Northern Michigan. Smelt City
To sit in my back yard and collect dust...Kwai said:
Trailer ho was here!
A mortar mixer maybe? Would work good for deer feed...
- 10,865
- 762
- 113
- Location
- Appomattox, VA
RE: Re: Unknown trailer ???
I've seen manure spreaders that look like that. They usually have the output at the rear of the trailer, which is why this is throwing me off, since it seems to lack an output.
I've seen manure spreaders that look like that. They usually have the output at the rear of the trailer, which is why this is throwing me off, since it seems to lack an output.
- 8,539
- 2,761
- 113
- Location
- Monrovia, Ca.
RE: Re: Unknown trailer ???
It looks like an asphalt or road base spreader. There are skids on the ends, the tongue comes off, wheels that look like they support the front...the left side of the trailer...and maybe turn the auger, there is a latching mechanizm on the left side where it would hook to a vehicle to be towed and the handle on the back side controls a gate above a roller, like to gauge the thickness of the applied material. Is it on GL? If so, click on the NSN and it might tell what it was/is.
In the first pic, there is another one of them, but it has no transport trailer, it's on the ground.
It looks like an asphalt or road base spreader. There are skids on the ends, the tongue comes off, wheels that look like they support the front...the left side of the trailer...and maybe turn the auger, there is a latching mechanizm on the left side where it would hook to a vehicle to be towed and the handle on the back side controls a gate above a roller, like to gauge the thickness of the applied material. Is it on GL? If so, click on the NSN and it might tell what it was/is.
In the first pic, there is another one of them, but it has no transport trailer, it's on the ground.
Rattlehead
Member
- 645
- 3
- 18
- Location
- Michigan
citizensoldier said:To sit in my back yard and collect dust...Kwai said:
Trailer ho was here!
A mortar mixer maybe? Would work good for deer feed...
Uh oh, Trailer Ho has something new to locate!
KaiserM109
New member
- 1,108
- 4
- 0
- Location
- SE Aurora, CO
RE: Re: Unknown trailer ???
That looks like something someone built from parts of an M101.
That looks like something someone built from parts of an M101.
bulldog_mack13
3/3 ACR
- 2,968
- 34
- 0
- Location
- Colo Springs, CO
RE: Re: Unknown trailer ???
It has M37/M101 tires/rims but I think the trailor is a military one not homemade. Check the data plate on the back
It has M37/M101 tires/rims but I think the trailor is a military one not homemade. Check the data plate on the back
DavidB
Active member
- 323
- 30
- 28
- Location
- Southeast Wi.
RE: Re: Unknown trailer ???
Transport system for aggrigaite spreading box mounts to rear of truck from side.Wheels removed slides on runners at bottom ends.Three sold at McCoy not long ago.
DavidB
Transport system for aggrigaite spreading box mounts to rear of truck from side.Wheels removed slides on runners at bottom ends.Three sold at McCoy not long ago.
DavidB
beaubeau
New member
- 622
- 2
- 0
- Location
- Salisbury,N.H. 03268
RE: Re: Unknown trailer ???
Heck, I thought it was something that Officers road to the Ball in!!!?? LOL I thought it was some kind of Manure spreader. Same differance!!
Heck, I thought it was something that Officers road to the Ball in!!!?? LOL I thought it was some kind of Manure spreader. Same differance!!
Kwai
New member
- 223
- 5
- 0
- Location
- Houston, TX
RE: Re: Unknown trailer ???
DavidB got it. I did some more research and found that it's an aggregate spreader.
What kind of truck does it attach to?
DavidB got it. I did some more research and found that it's an aggregate spreader.
What kind of truck does it attach to?
NB1944
Member
- 78
- 0
- 6
- Location
- Denver, CO
This could be a trailer used by airborne troops to prepare for roadwork/airstrip ops. It definitely is Mil-spec, but it appears to be lightly built (perhaps to save weight). One of our guys have several pcs of airborne gear similar to this, but I have not seen this type of trailer, specifically. It appears to be late war/Korea vintage. Check the Data plates.
- 3,585
- 7
- 0
- Location
- Parkville, MD
I know the 642nd Engineers had these but they were sitting on the ground. When I was a lieutenant I went to their motorpool to contact them about sufacing our truck motorpool. When I asked if they had tailgate spreaders for their dumps they looked at me like I was from Mars. I walked around the motorpool and found two of these sitting on the ground. I asked them if they knew what they were and the Engineer lieutenant told me they did not know and were getting ready to turn them in as excess. I grew up in the country and these are invaluable for a smooth even bed of aggregate when using a dump truck to lay the stone. I have not seen them on the trailer as shown but it looks pretty light weight.
Kwai
New member
- 223
- 5
- 0
- Location
- Houston, TX
so do these attach to the back of a dump truck (sans trailer attachments)?
KsM715
Well-known member
- 5,149
- 142
- 63
- Location
- St George Ks
Sorry to dig up an old thread but.... did anyone find out what truck this attached to? do you have to put it on a truck to use? I would like to have something to help spread gravel on my driveway but I dont have a dump truck and doubt this would attach to my M715
Last edited:
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
interesting... very interesting. lets see if someone can come up with a good idea
gunboy1656
Active member
- 3,587
- 22
- 38
- Location
- Beaver Falls, PA
When i was returning from overseas, our signal trucks were sitting next to a bunch of these being pulled behind M998's.
This kind of equipment is fairly common in small townships that have a lot of gravel roads. It's most often referred to as a "Maintainer". This is an old one. Most today have the spreaders powered through hydraulic gearboxes. The attachment points for the rear of truck are very evident in the pics,(the prong looking things). Then chains hook up to the rear of the bed in the keyholes much like they do when you set the gate for tailgating materials. In this pic of my IH you can see the round bar across the rear. It's not a bumper! This is where the prong attachment hooks on. Sorry for the blurry pic.
Attachments
Last edited: