Good to see the flashers up there...we need to be seen.A buddy of mine from work called the other day and told me his truck broke down just outside of town. It died in a spot where the tow truck couldn't get to it because of the snow/drifts so we hooked up the tow strap but the problem was the truck was completely dead, only thing that worked was the dome light. Couldn't even shift it into neutral!So we ended up dragging the truck with it in park to a location where the tow truck could get to it. I sure hope we didn't damage his truck but it was his idea to drag it like that. Truck was a 2017 F150.
View attachment 755758View attachment 755759View attachment 755760
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Uses for Deuces
- Thread starter General Mcgregor
- Start date
SRB1976
Member
- 317
- 9
- 18
- Location
- Hanna, Wyoming
Yes sir. They've come in handy this winter.
SRB1976
Member
- 317
- 9
- 18
- Location
- Hanna, Wyoming
Helping a buddy move.
![20190718_132715[1].jpg](https://www.steelsoldiers.com/data/attachments/529/529652-e6a2eae09646ec3113fba75c169f33be.jpg "20190718_132715[1].jpg")
fpchief
Well-known member
- 1,041
- 220
- 63
- Location
- South Alabama
Next best thing to having your own truck is having a friend that has a truck...
HDN
Well-known member
- 2,127
- 5,125
- 113
- Location
- Finger Lakes Region, NY
I actually spent a couple weeks reading this entire thread in anticipation of getting my first deuce. Nothing but inspiration in here! The first thing I did after picking it up was load it with stuff from my house for the big move!
Then the following Wednesday, I got it inspected and drove it to the office, taking care following company procedure and backing the vehicle in.
The driver of the car I parked next to remarked how small and unimportant my deuce made his ride look
My boss was wondering if I was going to take it on site visits located in East Jesus!
Then the following Wednesday, I got it inspected and drove it to the office, taking care following company procedure and backing the vehicle in.
The driver of the car I parked next to remarked how small and unimportant my deuce made his ride look
My boss was wondering if I was going to take it on site visits located in East Jesus!
Last edited:
fpchief
Well-known member
- 1,041
- 220
- 63
- Location
- South Alabama
That is a clean looking A3!!!I actually spent a couple weeks reading this entire thread in anticipation of getting my first deuce. Nothing but inspiration in here! The first thing I did after picking it up was load it with stuff from my house for the big move!
View attachment 781534
View attachment 781533
Then the following Wednesday, I got it inspected and drove it to the office, taking care following company procedure and backing the vehicle in.
View attachment 781532
The driver of the car I parked next to remarked how small and unimportant my deuce made his ride look
blisters13
Active member
- 461
- 78
- 28
- Location
- Beaumont in SoCal
Making it earn its living doing a bed swap
rustystud
Well-known member
- 9,298
- 3,072
- 113
- Location
- Woodinville, Washington
I've been meaning to do that to my truck. What size pipe did you use ? Also where did you attach the "stay" lines too ? The back of the bed ?View attachment 784406 View attachment 784407 View attachment 784408View attachment 784409
Making it earn its living doing a bed swap
A few more pictures of your front hoist system would be nice and appreciated !
Thanks.
- 2,069
- 3,019
- 113
- Location
- Florence, SC
Subscribed!
- 18,548
- 5,901
- 113
Working as she should be!View attachment 784406 View attachment 784407 View attachment 784408View attachment 784409
Making it earn its living doing a bed swap
Is your jib pole crane Mil Surplus or "home grown"?
What is the length of each leg?
If I cannot find one of Uncle Sam's used, I would consider fabbing one like that.
HDN
Well-known member
- 2,127
- 5,125
- 113
- Location
- Finger Lakes Region, NY
Nice! If I had a winch-equipped truck I'd want the A-frame for it too!
In the manuals I've read, it seems the cab top needs to be removed for the A-frame cables going to the rear of the truck. Having not seen this setup in-person, can that be adjusted so the cab top can be left on?
In the manuals I've read, it seems the cab top needs to be removed for the A-frame cables going to the rear of the truck. Having not seen this setup in-person, can that be adjusted so the cab top can be left on?
- 3,263
- 3,386
- 113
- Location
- NORTH (Canada)
https://www.steelsoldiers.com/showt...frame-kit-(hoist)-for-M35-let-s-talk-about-it
The original A-frame discussion thread
The original A-frame discussion thread
blisters13
Active member
- 461
- 78
- 28
- Location
- Beaumont in SoCal
Thanks guys! Right at this second I have a headache and fever- gimme a day or two and I’ll post some details.
- 8,548
- 2,783
- 113
- Location
- Monrovia, Ca.
I miss that truck! It still looks great! I do like the front hoist, thought of doing that more than once.
blisters13
Active member
- 461
- 78
- 28
- Location
- Beaumont in SoCal
It’s been a pretty good truck- Lots of veterans have ridden in it and it’s not let me down as long as I keep up on the maintenance!
rustystud
Well-known member
- 9,298
- 3,072
- 113
- Location
- Woodinville, Washington
Totally agree ! I could use that to move around the heavy engine blocks and transmissions and transfer-cases around here. As it is I have to get my son and the heavy duty hand-truck for the transmissions and transfer-cases. The engines need the neighbors tractor . He can only help on certain days though. So I can only work on his schedule which sucks. With that front hoist I could move anything by myself !
It would be nice to have some pictures showing how the stay cables are attached to the truck. Do they need something to hold them off the cab roof ? Or do they clear it ? Can they be adjusted to raise the boom ? Maybe attach a small electric winch to them ? I suppose it could be done even if the stock configuration doesn't allow it.
Found the answers to most of my questions from "CattleRepairmans" post.
Thanks !
Last edited:
Sparkyz911
Active member
- 65
- 61
- 33
- Location
- Central IL USA
Jelly of the a frame!
Used my deuce as "Santa's sleigh" today. Delivered a truck load of gifts to some less fortunate kids at a local school. 911Cheermeisters on facebook/Instagram.
Used my deuce as "Santa's sleigh" today. Delivered a truck load of gifts to some less fortunate kids at a local school. 911Cheermeisters on facebook/Instagram.
HDN
Well-known member
- 2,127
- 5,125
- 113
- Location
- Finger Lakes Region, NY
I love the red nose you put on its grill!
I've thought about using mine for summer charity events, like a fill the truck campaign or something...
I've thought about using mine for summer charity events, like a fill the truck campaign or something...
SRB1976
Member
- 317
- 9
- 18
- Location
- Hanna, Wyoming
Pulled out my huntin' buddies stuck truck. His truck sat out there for two days and two other trucks failed to get him out.
