• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Vacuum pump "bounce"?

flewbyu

New member
79
0
0
Location
Virginia Beach, VA
I understand the vacuum pump should pull down 20-25" Hg at idle. When I tested mine the needle was bouncing too bad to read. It jumped around approx 16-18" Hg with a swing of about 4-6". Is this normal?
 

m38inmaine

Well-known member
Steel Soldiers Supporter
2,118
67
48
Location
Maine USA
Napa has them also, just over $100, or flmv.net has nos units but cost a little more than a rebuild.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks