kml9705
Member
- 78
- 0
- 6
- Location
- Andover, NJ
I am looking at what is listed as a VIC-4 Intercom System, NSN 5895-01-144-5995. Other than a few references to the VIC-4 I can not find any real information on this system. From what I have found so far is that it is similar to the VIC-1 but can handle 4 radios, utilizes the same cables and headsets as the VIC-1 but the other components are supposedly not compatible. Does anyone have any information on this system?
![1.jpg 1.jpg](https://www.steelsoldiers.com/data/attachments/469/469048-4e4752510890c590d05d5be912729085.jpg)
![2.jpg 2.jpg](https://www.steelsoldiers.com/data/attachments/469/469049-af96fc4ddea333f08d93511ffe610df0.jpg)
I have two Motorola CDM 1550, one VHF and one UHF that I would also like to interface with this if possible. Can this be accomplished and how? And if so, what military type antennas would work with the Motorola radios?
I have searched but haven't found much that is relevant to my questions other than interfacing a CB with this system. Not being a technical guy when it comes to radios the threads were a bit confusing to me and not sure if the same procedure would work with the Motorola radios. here is the threads I found searching;
http://www.steelsoldiers.com/showthread.php?14284-VIC-4-intercom-manual-and-VIC-1-VIC-4-mods http://www.steelsoldiers.com/showthread.php?7124-AN-VIC-4-and-adding-switched-12V-24V-to-the-M35
http://www.steelsoldiers.com/showth...-interfacing-the-VIC-1-or-VIC-4-to-a-CB-radio
http://www.steelsoldiers.com/showthread.php?161130-VIC-4-Intercom-issues
Thanks
![1.jpg 1.jpg](https://www.steelsoldiers.com/data/attachments/469/469048-4e4752510890c590d05d5be912729085.jpg)
![2.jpg 2.jpg](https://www.steelsoldiers.com/data/attachments/469/469049-af96fc4ddea333f08d93511ffe610df0.jpg)
I have two Motorola CDM 1550, one VHF and one UHF that I would also like to interface with this if possible. Can this be accomplished and how? And if so, what military type antennas would work with the Motorola radios?
I have searched but haven't found much that is relevant to my questions other than interfacing a CB with this system. Not being a technical guy when it comes to radios the threads were a bit confusing to me and not sure if the same procedure would work with the Motorola radios. here is the threads I found searching;
http://www.steelsoldiers.com/showthread.php?14284-VIC-4-intercom-manual-and-VIC-1-VIC-4-mods http://www.steelsoldiers.com/showthread.php?7124-AN-VIC-4-and-adding-switched-12V-24V-to-the-M35
http://www.steelsoldiers.com/showth...-interfacing-the-VIC-1-or-VIC-4-to-a-CB-radio
http://www.steelsoldiers.com/showthread.php?161130-VIC-4-Intercom-issues
Thanks
Last edited: