• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Vintage Wiringof Maine

dabtl

Active member
2,053
7
38
Location
Denton, Texas
Just got in the wiring for the M135.

Works of art, all I can say. I had them put the turn signal harness in to make it a little safer to drive.

Just gorgeous wiring.
 

hippiedude

Active member
1,175
4
38
Location
Granby , Ct.
How much for the wiring ? Just nosey.. I got a m211 I want to put brake & blinker lights on...Plus some of my wires are in bad shape.....
 

dabtl

Active member
2,053
7
38
Location
Denton, Texas
The brake and blinker lights require an extra wire to the right rear. I am going to use an additional old style left light on the right side for the blinker.

I got everything from the cab back, turn signals added and from the cab forward. I have the cab harness, nos, but I may order one from Vintage if the quality comparison is really bad. That cost $580 and additional cab harness is $275.

This is really pretty wiring, a nice install diagram and instructions comes with it.
 

dabtl

Active member
2,053
7
38
Location
Denton, Texas
My turn signal harness is built into the harness in the rear and front. Neat install, it would appear. I will get around to it this Summer probably.
 
Top