VW Kurierwagen (VW 181)

[HUGO bOSS]

Slowly try to remove some of the rust...
Left rear bumper support zone...

No lubrification on the inside...

Allmost there...

 

[HUGO bOSS]

Old and new...

Inside was cleaned and painted with zinc...

Let's weld...

 

[HUGO bOSS]

Done...

 

[HUGO bOSS]

Keep going to the back...

To join the corner that I have allready done...
And another interior box allready zinc painted by me...

 

[HUGO bOSS]

Out with the old and rusty part...

 

[HUGO bOSS]

And in this zone is still there the small rubers for the tire support...

 

[HUGO bOSS]

More surprises...

And a new heart wire support to install...

 

[HUGO bOSS]

More cut...

Looks that was made for that place...

The two patches together...

Looking by inside... with a correct part for the screw

Need to grid...
The other side is still original...

 

[HUGO bOSS]

Missing the rest of the arch...

This zone is made with two original metal parts... they were 7 there...
Lovely scenario...

Two metal parts also here... one under the other...

 

[HUGO bOSS]

Made this patch bigger to cut after... better than missing...

 

[HUGO bOSS]

A pause was made... and I remove this two air parts on the enginne compartment...

The last two screws broke...

 

[HUGO bOSS]

Looking on the other side I see that have less patches...

 

[HUGO bOSS]

And started to look to this:

~
The right side was like this:

Not the same think... Two patches under...

 

[HUGO bOSS]

Inside was also wrong...

The left side dont have it...

But have this piece of... metal...

 

[HUGO bOSS]

Only one thing to do...

More rust... the drain hole was closed...

 

[HUGO bOSS]

Still there is a part of the old metal...

Will do to make the new one on the correct position...

 

[HUGO bOSS]

The other side will do to take the measures, but have a ding...

 

[HUGO bOSS]

Griding some old welding...

 

[HUGO bOSS]

And another patch above the rusty metal...

What was on they heads? No grid at the time or what?

 

[HUGO bOSS]

Made this...