wanted busted injection pump

[FreightTrain]

Does anyone have an injection pump that is junk?I need one for some bench fabrication on a project.Only part I need intact is the FDC and rear half.Don't even need a Hydro head?Someone has to have a pump that a rod cam out of a block and smacked the back of the pump.This is a Crazy Train Skunk works project......but I will give a hint.In cab smoke handle.

 

[ssgtwright-usmc]

PM coming your way in a min

 

[gimpyrobb]

Ft, let me know if you still need one.

 

[FreightTrain]

Yep,Sorry SSGT,Little too expensive and troublesome for a junk pump that I plan on just using as a Lab rat(AKA,Grind,file,Chisel,hammer,etc on).If you got one How much do you want for the Gimpy?

 

[country]

freighttrain

we have quite a few on the shelf

e-mail dave@easternsurplus.net

Dave
www.easternsurplus.net

 

[sgtrisk]

FreightTrain, you really piqued my interest on your project!! I'd sure love to know what you've got up your sleevie (besides your armie!). I've always wanted to rig up a "smoke" device on a car. I'm sure the local law enforcement types would not approve, though.

You can PM me, if you're more comfortable...

Brad

 

[Floridianson]

Brad you been watching the Bond flicks. The smoke cam is in the IP and I would think that FT is trying to be able to adjust the fuel rate at will.

 

[gimpyrobb]

I'll let you know tonight.

 

[FreightTrain]

yep.I did a little rough sketch on how I THINK I can do it using some rods,nuts,pins,and a extra hand throttle assembly.

 

[FreightTrain]

Oh,it could come in handy in a driving way.Low fuel rate for normal driving,hit a hill turn up the fuel a little.Then turn it back down on teh back side for cruising.

 

[wreckerman893]

Did you forget you got a whole pump on one of your engines holding down my yard?

 

[Junkyard Wars Crusher]

I'll let you know tonight.

This is the partial pump that is for sale (ref: gimpyrobb)
$25 + shipping.

 

[Floridianson]

I will take one more guess and say that you are going to use the FDC plunger to control the wedge plate. Sounds like a cool project what ever you do.