Weapons mount spacer bar missing

[HUNvee]

I want to install a swiss cheese gun mount, but the weapons mount spacer bar is missing (I don't know the exact name). It doesn’t seem like a complicated part, so I’d make it for myself. I have the fully round stamped turret weapons station.
Would any of you be so kind as to measure the exact dimensions for me? Aluminum or steel? Are the ends open or welded down?
Thanks!

 

[Retiredwarhorses]

It’s a solid bar of aluminum ….

 

[chucky]

I want to install a swiss cheese gun mount, but the weapons mount spacer bar is missing (I don't know the exact name). It doesn’t seem like a complicated part, so I’d make it for myself. I have the fully round stamped turret weapons station.
Would any of you be so kind as to measure the exact dimensions for me? Aluminum or steel? Are the ends open or welded down?
Thanks!

If its for your humv you can look up m-66 ring mount and get alot more info on the proper mount for your truck

 

[Retiredwarhorses]

If its for your humv you can look up m-66 ring mount and get alot more info on the proper mount for your truck

not sure how an M66 ring mount would work on a hmmwv….

 

[chucky]

not sure how an M66 ring mount would work on a hmmwv….

m-66 were used on the humvs and lmtv/fmtv

 

[Retiredwarhorses]

m-66 were used on the humvs and lmtv/fmtv

No sir, M66 was never used on a hmmwv…I’ve been installing turrets since 2000, there are absolutely no provisions
to install the beast of an m66.

 

[chucky]

No sir, M66 was never used on a hmmwv…I’ve been installing turrets since 2000, there are absolutely no provisions
to install the beast of an m66.

The local humvs here are all using m-66 my friends humv has a m-66 on it and the bolt hole measurement are exact with the boltholes in my ceiling of a fmtv

 

[Retiredwarhorses]

LWS uses Same bearing, weapons tray, hatch and swiss cheese mount as A2 HMMWV, M66 was 5 ton and Deuce turret setup.

 

[HUNvee]

Easy guys!
Then I just want to ask the height of the bar!

 

[HUNvee]

In the meantime, I checked.
The m66 is completely different from mine. There is no weapons mount on it.

 

[FKAM]

Easy guys!
Then I just want to ask the height of the bar!

Mine isn't square, but it is 1 inch wide by 1 3/8 inch tall

 

[frank8003]

so where is the pitchers and the drawings?