cucvrus
Well-known member
- 11,474
- 10,441
- 113
- Location
- Jonestown Pennsylvania
It is FRP. Fiberglass reinforced plywood.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your CUCV today/lately - Part 2
- Thread starter Warthog
- Start date
thomastinsley
New member
- 5
- 0
- 1
- Location
- Philadelphia, MS
That looks good. How do you have that mounted? Im thinking of putting one on my 09 but cant quite figure out how i want to mount it to the roof.
cucvrus
Well-known member
- 11,474
- 10,441
- 113
- Location
- Jonestown Pennsylvania
Very carefully with short bolts. Lots of them.
RobM36A2
Member
- 302
- 9
- 18
- Location
- The Netherlands
That would also look awesome on a M101.
- 34,012
- 1,810
- 113
- Location
- GA Mountains
That is a super cool body and I look forward to seeing more of it. The 101/116 chassis makes the wheels really start turninig.
corvette9
Member
- 184
- 2
- 18
- Location
- new haven ct
Awhile back I posted that I had a bent ft end on my 1028. Seems the truck got hit in the rt ft at one time and did not get repaired correct. I set it up on my frame machine and found the rt ft rail down and back about an inch. Long story short the frame is fine now but the ft end still has a slight bend back. Just short of 1/2 inch. I'm fine with that for an old chevy truck.Now I can keep going on my orig. plan. Next is to cleanup up the rear of the frame and get the frame painted.
Last edited:
Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
Wow. Never heard of a frame machine before, much less seen one:
- Is it used to measure the alignment, and also to make any needed corrections?
I can't really picture how it works. Looks like nothing more than a raised platform with a big pole. Do you mind just giving a real short explanation, please?
SteveUK
New member
- 21
- 0
- 0
- Location
- United Kingdom
At the weekend I did the Doghead Conversion (I have voted and added to the thread) on my '85 M1009.
Three things: what kind of bulb does the under-dash light take (a pic would really help) as it looks like an uncommon (in the UK) fitting, and - do members have any suggestions how I can safely clean the cat's cradle of wires and fittings in this area - how does so much crud get up UNDER a dashboard? And - is the bulb holder for the front side marker light a standard Chevy/GM item. Mine has become brittle and is about to disintegrate.
Thanks.
Three things: what kind of bulb does the under-dash light take (a pic would really help) as it looks like an uncommon (in the UK) fitting, and - do members have any suggestions how I can safely clean the cat's cradle of wires and fittings in this area - how does so much crud get up UNDER a dashboard? And - is the bulb holder for the front side marker light a standard Chevy/GM item. Mine has become brittle and is about to disintegrate.
Thanks.
RobM36A2
Member
- 302
- 9
- 18
- Location
- The Netherlands
Towed a GMC CCKW today. Was only for a few miles, because the transfercase of said truck died earlier this week.
Took a little effort to get going, but once rolling, keeping momentum is a piece of cake.
The braking part was a little challenge, because of all the weight and the towbar, but soldier B in the GMC did some of the braking for me.
Forgot to take pictures.
Took a little effort to get going, but once rolling, keeping momentum is a piece of cake.
The braking part was a little challenge, because of all the weight and the towbar, but soldier B in the GMC did some of the braking for me.
Forgot to take pictures.
Yes SteveUK, that is a standard GM item.
SRB1976
Member
- 317
- 9
- 18
- Location
- Hanna, Wyoming
I was able to use my winch for the first time yesterday. I got a call from a friend from work that his buddy got stuck north of town out in the middle of nowhere. So, we brought the ol' trusty CUCV and was able to winch him out with no problem. Poor guy had to walk 8 miles in the high desert to where we could meet him.
Saw this little guy slithering around
Saw this little guy slithering around
Last edited:
Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
I like the prairie rattler, or at least I think that's what she is (killer camouflage).
There are no tracks leading to the spot where he hung up. It's like he broke through a crust or something.
How did he get stuck like that!?
SRB1976
Member
- 317
- 9
- 18
- Location
- Hanna, Wyoming
The ground was pretty dry behind his truck. That alkali can be deceiving. It can look dry on top but still be wet underneath.
Last edited:
glaser06
Member
- 239
- 1
- 18
- Location
- Red Stick, La
Drove from NOLA to ATL yesterday. Yeah it whines at 60m mph but at least the weatherstrip whistle is gone
Next is new floormat or bed liner in the cab.
Next is new floormat or bed liner in the cab.
SRB1976
Member
- 317
- 9
- 18
- Location
- Hanna, Wyoming
unaffiliated
Member
- 394
- 11
- 18
- Location
- Coosa, Georgia
First Rule of 4 wheelin in an environment like that: NEVER GO OUT ALONE.
Another Ahab
Well-known member
- 18,007
- 4,579
- 113
- Location
- Alexandria, VA
ANY kind of risky adventuring warrants a buddy, you know?
Both for safety, and also to help you exaggerate the story as time goes on.
Last edited:
- 1,657
- 1,676
- 113
- Location
- Nova Laboratories, WA
I was able to use my winch for the first time yesterday. I got a call from a friend from work that his buddy got stuck north of town out in the middle of nowhere. So, we brought the ol' trusty CUCV and was able to winch him out with no problem. Poor guy had to walk 8 miles in the high desert to where we could meet him.
View attachment 559442View attachment 559443View attachment 559444View attachment 559445View attachment 559446
Saw this little guy slithering around
View attachment 559447
No BFL. Fail!
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
BFL??? What does that mean
- 1,657
- 1,676
- 113
- Location
- Nova Laboratories, WA
- 34,012
- 1,810
- 113
- Location
- GA Mountains
Bolt face logo?