- 587
- 588
- 93
- Location
- Evansville, IN
eBay listing I found that matched these rails.Contact information for the rails. Etc. Thanks
254793765692
Didn’t want to post link, thought the auction number was ok.. listed as a “Jeremy”
$1145 bucks
Ocho
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
eBay listing I found that matched these rails.Contact information for the rails. Etc. Thanks
Please post purchase information and price. How are they in a side impact?Contact information for the rails. Etc. Thanks
How the hell is he supposed to know that??How are they in a side impact?
He is posting about the units and might know more that he just posted.How the hell is he supposed to know that??
He has one side bolted on and you want him to what , let someone crash into the side of him?
Seriously Tobash sometimes I wonder about you.
Contact "Jeremy Johnson" by way of "Messenger" on Face Book or on Ebay at Humvee/Hummer Rock Sliders HUMVEE m998 m1045 m1123 m1097 hummer H1 ( jeremy 51307)Contact information for the rails. Etc. Thanks
I appreciate your question although the rock rails were purchased mainly for the removable step so my wife can get in a bit easier. I actually am in the process of ordering the pictured grab bar rails to mount on the hard top roof. She or I should have no problem getting in once everything is installed. To actually answer your question the rails are not welded two piece angle iron. They are laser cut one piece GRADE 50 HOT ROLLED, PICKLED and OILED (HRPO) CARBON STEEL. I imagine that they will pretty much take whatever abuse that you throw at them. I do a lot of parades in my HMMWV. I like knowing that my HMMWV is certainly capable of "extreme" driving although I typically do not drive it that way.He is posting about the units and might know more that he just posted.
He seems to know a bit about the vendor.
He could always field test his vehicle for me.
You’re too dark BlkHMMWV. Time to paint your truck another shade like white, and lighten up.
I just did the same thing recently, Ya the fan hose is a tight squeeze, fortunately I can slip an arm in just enough to get to it. So I feel your pain.I got all those dang radiator hoses changed and a new heater control valve installed. Next on the list is the belts. I a trying to recruit an anorexic midget to assist with the removal of the line going to the fan motor.
I can see your pushbutton light cntrols.
Those look fantastic and actually legible at-a-glance in the dark, rather than just looking at the needle and remembering roughly what speed each position means.
That doesn't sound good. Post a picture of how it interferes. I haven't seen a Rhino spare tire carrier that doesn't allow the tailgate to open fullyToday I installed a long awaited tailgate only to discover it was all for nothing since it will not fully open when paired with the rhino spare tire carrier. (Sigh)
push the carrier out of the way and open the tailgate.Today I installed a long awaited tailgate only to discover it was all for nothing since it will not fully open when paired with the rhino spare tire carrier. (Sigh)
Today I learned that by holding the locking mechanism up, the rhino carrier will swing past 90 degrees and allow the tailgate to fully open!you have installed something wrong. or you need to lift the lock mechanism up on your Rhino to allow it to swing past 90 degree's.
It will lock at the 90 degree point this may be what your experiencing