• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What have you done to your HMMWV today/lately

Red6

Member
6
27
13
Location
New Milford, Pennsylvania
Started the fun task of water pump replacement with all new hoses (not shown), now on hold because I stumbled upon the Paradox line kit to aid cooling the rear of the engine so I ordered that. Replaced fan clutch bearings seeing Its already out. I don't want to have to get back in there for awhile. Nice to be able to work on something not complicated with electronic gizmos.
 

Attachments

Maxjeep1

Well-known member
Steel Soldiers Supporter
1,338
1,918
113
Location
Las Vegas Nevada
Started the fun task of water pump replacement with all new hoses (not shown), now on hold because I stumbled upon the Paradox line kit to aid cooling the rear of the engine so I ordered that. Replaced fan clutch bearings seeing Its already out. I don't want to have to get back in there for awhile. Nice to be able to work on something not complicated with electronic gizmos.
I got this from Leroy Diesel. I haven’t installed it yet. It will send more water back to the radiator and less hot coolant back to the water pump. It threads into the top of the water pump. Might not make any difference but I like the idea.FA37FA85-3FB8-4CDD-922E-203DC035CECD.jpeg
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,018
9,702
113
Location
Papalote, TX
I got this from Leroy Diesel. I haven’t installed it yet. It will send more water back to the radiator and less hot coolant back to the water pump. It threads into the top of the water pump. Might not make any difference but I like the idea.View attachment 880969
I stuck a 1" wood dowel in the bypass hose and drilled a 5/16 hole in it, it made no difference that I could tell, it did seem like a good idea though.
I ended up pulling it out and again no difference.
 

Maxjeep1

Well-known member
Steel Soldiers Supporter
1,338
1,918
113
Location
Las Vegas Nevada
I stuck a 1" wood dowel in the bypass hose and drilled a 5/16 hole in it, it made no difference that I could tell, it did seem like a good idea though.
I ended up pulling it out and again no difference.
I was thinking about the extreme heat in Las Vegas and I thought It might help on the hottest days.
 

Mainsail

Well-known member
Steel Soldiers Supporter
1,513
1,698
113
Location
Puget Sound, WA
I started working yesterday on sealing the rear to keep water from rolling forward out of the bed into the cabin. Everything came to a screeching halt because I don't have a compass. :mad:

Today I ran out and picked up a compass.

Home Depot sells a broken-in-half hardie-plank for 50% off. I picked up a length of C-channel (and I have a lot left over).

Concept:

RW01.jpg

Putting the compass in the game, I got the floor traced onto the board.

RW02.jpg

My jigsaw skills are pretty poor, but that's what silicone is for. I was going to use beveled head screws and nuts, but that would mean calling out soldierette B and she was busy, so I used rivnuts instead.

RW03.jpg

C-channel mounted:

RW04.jpg

With the hardie-plank painted with rapco and copious amounts of silicone, the finished product came out pretty good. I can always remove the board and cut a new one better, because I still have the other half of the plank, but this should work for now. I added two L-brackets screwed into the wood behind the AC box to make it more secure.

RW05.jpg
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks