Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
I guess that makes sense since it came with a 400a alternator. Any chance on knowing the partnumbers? Or photos so I can see what it looks like.Large 200 amp I think power connector for ambulances and shelter carriers
Antenna? That makes sense why it is missing. Demil requirements. I do have that huge power connector in the rear passenger floor. It takes away a lot of foot space.That's a pass through for an antenna cable
Shelter power cables went either straight to the batteries or to the 200 amp umbilical plug in the rear passenger footwell. None of the shelters (as far as I know) had power cables that ran through the rear passenger area and into the wheelwell.
Thanks~View attachment 858172
View attachment 858173
Not sure if it's this exact one, but it's a metal piece with a taper to it, and a rubber grommet that also has a taper. When the metal piece is tightened down, ot compresses the grommet in on the cable passing through it to create a tight seal.
GROMMET HMMWV CABLE INSTALLATION A3046176-A3046176
haneyelectronic-com.3dcartstores.com
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!