kipman
Active member
- 2,514
- 15
- 38
- Location
- Lancaster Ohio
Should i run straight weight rotella,and what for the diffs and tranny? thanks kipman
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
what kind of oil for m35a2
- Thread starter kipman
- Start date
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,608
- 1,163
- 113
- Location
- Athens, Ga.
You can do a search, we've covered these issues in some pretty in-depth conversations, but the short answer is that a lot of us are running 15W40 Rotella for the engine.
I have 90 weight GL1 in my diffs, transfer and tranny (as the LO calls for) but a lot of other guys here have GL5, with an MT1 rating.
Gear oil has to be safe for use in gearboxes with brass and bronze (yellow metals).
Do a search for GL1, GL5, lube, etc. You'll find lots of discussion.
I have 90 weight GL1 in my diffs, transfer and tranny (as the LO calls for) but a lot of other guys here have GL5, with an MT1 rating.
Gear oil has to be safe for use in gearboxes with brass and bronze (yellow metals).
Do a search for GL1, GL5, lube, etc. You'll find lots of discussion.
acetomatoco
New member
- 2,198
- 9
- 0
Any Diesel rated 15-40 will work fine.. If you are in the cold zone of Ohio, you may like 10 for the the short winter hops...stick with the GL1 in your diffs...