• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What to look for when previewing MEP-002A

leedawg

Member
270
10
18
Location
Napa / CA
Looks great, lets see some after pics now that you have the batts installed and everything. Do you mind taking one picture close up where the oil filter housing is. I just got one of these myself and the cover on the starter lock out switch is missing and the wires to it are cut so im pretty sure im going to be into a bit of a project getting some of the wiring fixed on mine. Thanks

Lee
 

Jimc

Member
725
1
18
Location
Mullica, nj
thats fantastic. good for you!! seems like another good thing to do to insure reliability is to go over all the wire connections and grounds to make sure everything is clean and making good contact. seems like alot of issues lately can be avoided by doing that. alot of components on these generators ground through the case and the mounting bolts make the connection which like on mine every nut bolt and washer were just about completely rusted away.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks