84cucv1ton
Active member
- 1,822
- 0
- 36
- Location
- New Jersey
i know the pump is on the way out, but it did start and move as long as the rpm was up. now been a few weeks since it been moved. will not idle at all. i was just curies. thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
what would cause a injection pump to just quit?
- Thread starter 84cucv1ton
- Start date
hemichallenger
New member
- 363
- 2
- 0
- Location
- deland fl
Sounds like it is not getting fuel. First check the supply pump.
84cucv1ton
Active member
- 1,822
- 0
- 36
- Location
- New Jersey
its getting fuel.
3dubs
New member
- 424
- 2
- 0
- Location
- Houston, TX
Ultra Low Sulfur Diesel (ULSD) it kills IP's and injectors. The sulfur was a lubricant so you have to add a lubricant untill they make an IP and injector to use ULSD in a 6.2. If that is the problem get new injectors too. If you have been adding a lube then how old is it? When the seals go it goes quick.