• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

what year did AM General start building M998

gem1410

Active member
525
44
28
Location
TOMS RIVER NJ 08527
In what year did AM General start building M998s and were the 1985s actually built in 1984--Is there a plate with the actual build date on the vehicle--Having trouble with motor vehicle--They always look to deep--Thanks George
 

ClarkeF

Member
206
5
18
Location
Hestand, KY
This may help. G503.com Message Forums • View topic - What year of production is SN 7xxx?

I'll post a pic of where the body # is located tommorrow.
Body number is stamped into the body at the base of windshield - in front of the a-pillar frame - right in front of the windshield gasket - about 8-12" in from the edge of the truck on the flat part. Hard to see if the truck has been repainted several times.

Hopefully your number matches your data plate. There is good evidence that at some of the auctions the data plates were pulled out of a box when you bought a truck - and not actually attached...


Cheers,

Clarke
 

TedG

Well-known member
1,133
39
48
Location
MI USA
Here is a picture of where the serial number is on the a-pillar. Someone ask me in a pm which I deleted prior to answering, so I thought I would post it here. I hope this helps.
 

Attachments

hummer4x4guy

Member
770
4
18
Location
Lansing, Mi
I believe they started the task of looking for one vehicle to replace all the many different vehicles much earlier of course before the build. I have a data plate serial # 000080 for an M-997 built 5/85
 

papakb

Well-known member
2,285
1,185
113
Location
San Jose, Ca
That number on the A pillar isn't really the VIN number, it's the secret number that If you have a contact in AMG can tell you everything you'd ever want to know about that specific vehicle. Manufacture date, original order configuration, revision level, etc. The actual VIN number on the early HMMWVs is a 6 digit number stamped on a data plate that's rivetted to the lower left corner of the B pillar. It's also one of the the plates that got cut off of the auction HMMWVS. On USMC vehicles it's sometimes found rivetted into the depression on the side of the left rear quarter panel that also got removed. This leads to quite a bit of confusion because the data plates were given to the auctioneers but there's no guarantee that they got matched up to the same vehicles as they were auctioned off. So the A pillar number information might not match the B pillar information. :roll::roll:GREAT HUH???:roll::roll:

It really doesn't create problems because there's still only 1 vehicle with that particular VIN number out there.
 

NDT

Well-known member
Steel Soldiers Supporter
10,458
6,530
113
Location
Camp Wood/LC, TX
Does anyone have a contact in AMG? My M1037 is a pre-prodution prototype and I would really like to know how they managed to bend the frame.
 

emmado22

Moderator
Super Moderator
Steel Soldiers Supporter
7,058
147
63
Location
Mid Hudson Valley NY
AMG doesnt support civy HMMWV owners AT ALL... . They dont want us to exist. I'll be amazed if you get past the "I have a Ex USMC HMMWV, and I was looking for info on it" "CLICK".................
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks