What's Missing?

[HoveringHMMWV]

My CDR valve is missing a hose /line. I've found it in the TM diagrams but they don't say what it goes to. Your assistance would be greatly appreciated.
- HoveringHMMWV

 

[dilvoy]

It goes down to the nipple on top of the upside down black plastic cup that is just outboard of the frame. This is part of the system that controls how much crankcase pressure is put into the items connected to the vent system. Army Vehicles usually don't have this, unless DWF has been added.

 

[Retiredwarhorses]

Also, the heater crossover plenum to the drivers side for your heater.

 

[osteo16]

hmmmmm...confusing to say the least,,,

 

[HoveringHMMWV]

It goes down to the nipple on top of the upside down black plastic cup that is just outboard of the frame. This is part of the system that controls how much crankcase pressure is put into the items connected to the vent system. Army Vehicles usually don't have this, unless DWF has been added.

Thank you for the info. Yes, it did have the DWF kit installed as it was a former USMC vehicle.

 

[HoveringHMMWV]

Also, the heater crossover plenum to the drivers side for your heater.

Right you are and I'm trying to track down that part.