MTVR
Well-known member
- 698
- 741
- 93
- Location
- Waco Texas
What are these things, and why are they on the trucks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What's the deal with the "Omni ID" RFID rectangles stuck to the front and back?
- Thread starter MTVR
- Start date
- 15,998
- 22,423
- 113
- Location
- Burgkunstadt, Germany
This is a tracker. That way, the bean counters can track the equipment when its being shipped.
- 1,117
- 1,051
- 113
- Location
- Perry, FL
Or if it's stolen.
- 153
- 231
- 43
- Location
- wimberley texas
yes I got a few of those and my guy scanned emm and bingo a lot of information popped up, solution, I peeled emm all off .. best mac/mc
MTVR
Well-known member
- 698
- 741
- 93
- Location
- Waco Texas
Who's "your guy", what did he scan them with, and what information "popped up"?
- 15,998
- 22,423
- 113
- Location
- Burgkunstadt, Germany
Also that. But these things were not only used for trucks. Boxes and pallets were also "tagged". That was the term used when I asked about them. They are reuseable. It cut down on pilferage and misdirected shipments.
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
These RFID tags do nothing until scanned & then they give out all the info the army needs to know about that piece of equipment. There are also the type that have the 3v lithium battery that transmit data to a small area & if you have the correct receiver, you can pick up this info.
I bought a series of trailers that had the self powered units on them & to satisy my OCD, the batteries were removed for safe keeping.
I bought a series of trailers that had the self powered units on them & to satisy my OCD, the batteries were removed for safe keeping.