• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Where can I find Fuel Cap & Door?

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
Used is the only option that I know of. Hawkman, HillbillieWizard or cucvrus may have them
 

Drock

New member
1,020
12
0
Location
Eatonton GA
I'm collecting the parts to add a second fuel tank to my M1028. And I also need a (complete) fuel door including the whole opening to weld into the body. If anybody has one please PM me. Thanks D
 
I put my fuel opening on by cutting a hole and then putting the "new" door over it. By rounding the new door panels edges and using large self tapping bolts, it looks sharp. So that you know, I tried a short bed tank first, no go. I used drivers side brackets, and had drill three of the four bolt holes for the front one , but it worked well. Window flashing that comes in a roll and has adhesive on one side, then rubber and sometimes foil, makes great padding between the straps and tank.
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks