- 5,328
- 3,263
- 113
- Location
- Lexington, South Carolina
PM me, as I have a question or two. You can also post pictures so I know we are talking about the same thing.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Who has an M796A1 Bolster Trailer?
- Thread starter SCSG-G4
- Start date
drgreg
Banned
- 3,623
- 93
- 0
I have one of each. How can I be of help?
Attachments
quickfarms
Active member
- 3,495
- 24
- 38
- Location
- Orange Junction, CA
I have one, or what's left of one, It is a parts trailer for my M1061
giaesolar
New member
- 5
- 0
- 0
- Location
- United States
I just purchased one and am waiting for it to be delivered to my shop.
- 2,102
- 28
- 38
- Location
- Delta Junction, Alaska
I guess that a lot of us have them. Sometimes they are very handy.giaesolar
New member
- 5
- 0
- 0
- Location
- United States
I have an idea to turn it into a roll off trailer eventually or dump trailer. I picked up the trailer for $500 and picked up a mobile sanitary treatment plant for $400. The plant has a nice steel tub that I would like to mount on the trailer with a hydraulic kit. Probably going to sit higher than a normal one but it will be pretty nice and beefy. Have you ever seen anyone do anything like that? I would be interested in speaking with them. I searched the thread but found nothing with this model trailer.
- 1,577
- 137
- 63
- Location
- Norwood LA
They are handy for bulky loads.SCSG-4 what's your question?
giaesolar
New member
- 5
- 0
- 0
- Location
- United States
Just curious how they pull behind a standard F350 turbo-diesel and was interested to know if anyone had converted one to a dump trailer and their experience. My ultimate goal would be to make it into a roll off as the short distance from the axle to the rear of the frame looks to give a good pivot point to work with this application with little modification. I have to do a electric over hydraulic mod to it for the brakes and would be interested if you or anyone had a suggestion on what components worked well for them also. It is a relatively easy mod but one I have to make as I do not have a vehicle with air brakes to pull it with.
giaesolar
New member
- 5
- 0
- 0
- Location
- United States
How does it pull for you behind your pickup? Did you do a conversion on the brakes?
- 1,425
- 37
- 48
- Location
- Winter Haven, florida
I like the looks of this trailer, i was thinking about buying a M1061A1 and remove some weight and cut and weld in a section about 4' up front.
