-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Who has best deal on axle rebuild kits? Bearings, seals, boots etc etc...
- Thread starter ScubaCat
- Start date
Redbarn customs has a bearing kit
LARGE TAPPERED PINION BEARINGS W/ RACEs
1 SMALL LOWER FLAT BEARING
1 PINION SHIM PACK
1 LARGE & 1 SMALL PINION GASKET
2 PINION SEALS
For $600
I know the pinion seals are around $40 each from Napa.
I can almost buy two good used 5 ton axles for that $600.
Maybe cheaper and easier to get a set of old bearings and take it to a local bearing shop and have them find you the bearings. Check Oshkosh or another vendor for the NSNs maybe and then transfer it to the basic part numbers. Maybe cheaper. I do that for the 5 ton hub bearings and they are generally $15 or more cheaper than Napa or Truckpro.
LARGE TAPPERED PINION BEARINGS W/ RACEs
1 SMALL LOWER FLAT BEARING
1 PINION SHIM PACK
1 LARGE & 1 SMALL PINION GASKET
2 PINION SEALS
For $600
I know the pinion seals are around $40 each from Napa.
I can almost buy two good used 5 ton axles for that $600.
Maybe cheaper and easier to get a set of old bearings and take it to a local bearing shop and have them find you the bearings. Check Oshkosh or another vendor for the NSNs maybe and then transfer it to the basic part numbers. Maybe cheaper. I do that for the 5 ton hub bearings and they are generally $15 or more cheaper than Napa or Truckpro.
- 4,318
- 3,208
- 113
- Location
- Fort Worth, Texas
Most stuff through dealers will be "New Star" aka Korean/Foreign produced fyi.