Jake59
Active member
- 168
- 97
- 28
- Location
- Kaggevinne, Flanders, belgium
Hi 1St Sarge,
On my GP Module Z4 is fried ass well.
I have noticed my GP circuit has been changed to 12V.
The GP circuit is connected directly to 12V and the 2 resistors behind the air filer are completely missing; only the bracket remains.
Can I also use the same diode 1N4749A or should I use another one? And if so, could you advise me which one I should get?
Also, from what I understand I should replace the transistor D44E3 as well.
Any other advice you could give me?
Thanks,
Jake
On my GP Module Z4 is fried ass well.
I have noticed my GP circuit has been changed to 12V.
The GP circuit is connected directly to 12V and the 2 resistors behind the air filer are completely missing; only the bracket remains.
Can I also use the same diode 1N4749A or should I use another one? And if so, could you advise me which one I should get?
Also, from what I understand I should replace the transistor D44E3 as well.
Any other advice you could give me?
Thanks,
Jake