• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Winch Install

shannondeese

Member
651
16
18
Location
High Springs Fl
I finally got around to installing my winch today. It actualy went pretty easy. I need it for Sat I'm going to play in the snow and pick up a few down trees for fire wood. I even used the air fittings to run a cut off wheel to prep the cable to put into the swedge fitting. How much oil should be in each side of the winch though. Thanks and happy holidays.
 

Stretch44875

Super Jr. Moderator
Super Moderator
Steel Soldiers Supporter
2,958
28
48
Location
Tiro, Ohio
On the side of the winch housing there is a plug, fill to bottom of hole. Somewhere around 2 in from the bottom.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks