Winch mount problem

[08hmmwv]

Hey, Today I removed my ibis tek bumper and I purchased a winch mount I thought would work with my setup but I’m stuck. Seems like I need some type of bracket or I purchased the wrong mounting plate.
Here are some pictures of what I have, thanks In Advance!

 

[DREDnot]

Start by taking off the block off plates on the end of the frame. See whats in there.

Don't the mounting feet of the winch line up with those holes on the winch plate?

 

[08hmmwv]

Start by taking off the block off plates on the end of the frame. See whats in there.

Don't the mounting feet of the winch line up with those holes on the winch plate?

Yes the holes line up on the plate and winch but not the plate and frame. Which would be the block off plate I need to remove?

 

[DREDnot]

Which would be the block off plate I need to remove?

On the ends of both your frame rails...there is a rusty plate with a single bolt holding it in.

 

[86humv]

You have the wrong brackets, and wrong winch plate.
That plate is for a Warn 6k electric.
Your brackets are for a non-winch mount front plate.

 

[08hmmwv]

FRONT WINCH MOUNTING BRACKET MILITARY HMMWV HUMVEE WARN MILE MARKER | eBay

FOR MILITARY HMMWV M998 M1038 HUMVEE. Bolts and nuts not included. Mounting bracket is unpainted.

www.ebay.com

New HMMWV Front Winch Plate, with frame extensions, A2 Style, humvee 998, M1123 | eBay

This is also used for the ECV hood set up on all the newer A2 trucks.

www.ebay.com

would an of these be the right bracket for my winch? would I need anything else or would the brackets I have work?

 

[86humv]

The first one is it....and you need 12469393-1 and -2