• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Winch shifter shaft, twisted ?

Straybullet1946

New member
3
6
3
Location
Oxnard, CA
I have a 10k winch that works if one mounting bolt is removed so lever can be moved far enough. I think the shifter shaft is twisted. Does anyone recall if the two keyways on shaft are 180* apart? Mine are about 165* apart and I think they should be opposite each other(180*). While I am at it, any thoughts on source for winch parts and gasket/seal kits?

Thanks so much!!
 

Guyfang

Moderator
Staff member
Moderator
16,747
24,036
113
Location
Burgkunstadt, Germany
Not many people are going to read, let alone help you, because the title of your thread gives no clue as to what you really want. I think if it were my thread, I would change that.
 

marchplumber

Well-known member
Steel Soldiers Supporter
3,798
2,827
113
Location
Peoria, Illinois
A more direct title would also help others that might have a similar problem in the future. As far as being able to answer your question, I regret I am unable to but, there should be a lot of information contained within the TMS. I can't point you to which one specifically deals with the winch. Sorry I'm not much help. Good luck with the problem.....
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks