-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Windshield fold down straps
- Thread starter beehumvee
- Start date
riderdan
Member
- 313
- 20
- 18
- Location
- Central Kansas
I believe they're sewed on (I'm not home to look at my truck at the moment) to the loops at the top of the windshield frame. So you'd just need to acquire the webbing and sew some up.
Lindsaym151
Member
- 666
- 12
- 18
- Location
- Eustis,FL.
you can use the tie down strap from a M151, 1/4 ton Mutt(hood)
Wire Fox
Well-known member
- 1,252
- 161
- 63
- Location
- Indianapolis, Indiana
Step 1, Open Parts TM (TM 9-2320-280-24P Vol 1).
Step 2, Hit up the Table of Contents, find that the section I need is 225 (Windshield Assembly, Folddown).
Step 3, Identify part in diagram ( 18 )
Step 4, Reference following parts list to determine P/N / NSN. (PN 12338845, NSN 5340-01-185-7024)
Step 5, Search the internet for the part, hoping for the best availability and wonderful prices.
This is one of my favorite vendors with it listed: https://www.hummerpartsguy.com/STRAP-WINDSHIELD-FRAME_p_18343.html
(Listed as must-contact for availability. This is the case for all HMMWV parts. They probably have it and at a fair price, but you'll have to call or email or about it due to AM General restrictions.)
Here's a vendor I've never used: https://hummerpartspro.com/product/amg-12338845-strap-asm-windsheild-hold-down/
Ebay has them for cheap enough, delivered, that you've probably had a lunch this month that was more expensive than a pair of them; however, site rules prohibit me from listing those.
When you do get them, you should just be able to remove the footman loop, slide it on, then reattach the footman loop: no sewing required.
I don't normally break it down to this extent (with some sass laden in there), but I recall that you just recently acquired your HMMWV and you're probably alone in your region regarding HMMWV ownership, so learning the steps on how to look up these parts is really going to be a very great benefit to you!
Step 2, Hit up the Table of Contents, find that the section I need is 225 (Windshield Assembly, Folddown).
Step 3, Identify part in diagram ( 18 )
Step 4, Reference following parts list to determine P/N / NSN. (PN 12338845, NSN 5340-01-185-7024)
Step 5, Search the internet for the part, hoping for the best availability and wonderful prices.
This is one of my favorite vendors with it listed: https://www.hummerpartsguy.com/STRAP-WINDSHIELD-FRAME_p_18343.html
(Listed as must-contact for availability. This is the case for all HMMWV parts. They probably have it and at a fair price, but you'll have to call or email or about it due to AM General restrictions.)
Here's a vendor I've never used: https://hummerpartspro.com/product/amg-12338845-strap-asm-windsheild-hold-down/
Ebay has them for cheap enough, delivered, that you've probably had a lunch this month that was more expensive than a pair of them; however, site rules prohibit me from listing those.
When you do get them, you should just be able to remove the footman loop, slide it on, then reattach the footman loop: no sewing required.
I don't normally break it down to this extent (with some sass laden in there), but I recall that you just recently acquired your HMMWV and you're probably alone in your region regarding HMMWV ownership, so learning the steps on how to look up these parts is really going to be a very great benefit to you!
Friends, thank you very much for your help. Thats right, I am new in the humvee world, ( didnt receive the truck yet, next week I hope) and I am a little bit far from the USA. I really appreciate your explanation wire fox. Thank you. Unfortunately one of the dealer you recomend ask for $85 just for shipping...
But now I already know how to find the parts!
Thank you so much
Regards
But now I already know how to find the parts!
Thank you so much
Regards